Abstract:This paper presents the results of the investigation of a multilayer TiAlSiN/AlSiN coating. A novel coating architecture with a period consisting of nanocomposite sublayers of TiAlSiN and AlSiN was developed. We discovered that the combination of a harder sublayer with a more elastic one allows for obtaining a suitable combination of superhardness and enhanced toughness. The coating was deposited by cathodic arc technology. The EDS, XRD, and XRS analyses revealed that the nanocomposite structure is composed of TiAlSiN and AlSiN nanocrystallites, with sizes of 12–13 nm and 4–5 nm, respectively. The nanograin phase is incorporated in an amorphous Si3N4 matrix. The achieved structure causes the presence of four factors contributing to the hardness increase: nanocomposition, solid solution, refinement hardening, and the formation of many interfaces. An instrumented indentation test was used to investigate the mechanical properties. The developed coating possesses a superhardness of 49.5 GPa and a low elastic modulus of 430 GPa, resulting in an improved elastic strain resistance of 0.11, a plastic deformation resistance of 0.58 GPa, and an elastic recovery of 68%. These results imply that the developed coating combines high stability with mechanical degradation under external influence and provides an improved ability to absorb energy at deformation before fracture, and high elastic recovery. The investigation of the effect of the period modulation on the structure, composition, and mechanical properties of the nanocomposite multilayer TiAlSiN/AlSiN coating showed that the superhardness was due to the nanocomposite and solid solution hardening rather than the increased number of interfaces. The demonstrated combination of superhardness with high elasticity and improved toughness determines the developed nanocomposite TiAlSiN/AlSiN coating as very suitable for industrial applications such as high speed and dry machining.

Superhard Nano-Multilayers and Nanocomposite Coatings

Development of Superhard Ti-Si-N Nanocomposite Coating

The Role of Period Modulation on the Structure, Composition and Mechanical Properties of Nanocomposite Multilayer TiAlSiN/AlSiN Coatings

Review of Mechanical Performance of Superhard Nano-Multilayer Films

Effect of Multilayered Structure on Properties of Ti/TiN Coating

Hardening mechanism and plastic deformation behavior in super-hard AlCrNbSiTiN high-entropy nitride nanocomposite coatings

Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings

A Quantitative Study of the Hardness of A Superhard Nanocrystalline Titanium Nitride/Silicon Nitride Coating

Ti–Al–Si–C–N Hard Coatings Synthesized by Hybrid Arc-Enhanced Magnetron Sputtering

Synthesis and Characterization of Super Hard, Self-Lubricating Ti–Si–C–N Nanocomposite Coatings

Dependence of Microstructure and Hardness of Nanocomposite Coatings of Nc-（Ti1-xalxn）／a-si3n4 on Aluminum Contents

Effect of nano-multilayered ZrN/TiAlN hard coating as the interlayer on the microstructure, mechanical properties, and wear resistance

Preparation and Mechanical Properties of TiN/AlN Nano Multilayers

Hard and Corrosion-Resistant Ni-xAl-yTi Nanocomposite Coatings for CNT/Al Composites

Superhard Nanocomposite Ti–Si–C–N Coatings Prepared by Pulsed-D.c Plasma Enhanced CVD

Mechanical, oxidation, and cutting properties of AlCrN/AlTiSiN nano-multilayer coatings

Multilayered Coatings with Alternate Zrn and Tialn Superlattices

Nano-Composite Coatings with Improved Mechanical Properties and Corrosion Resistance by Thermal Spraying

The Nanostructured Phase Transition of Superhard Ti-Si-C-N Coatings.

Hard Yet Tough Thermodynamics-Driven Nanostructured (alcrnbsixti)n Multicomponent Nitride Hard Coating

Combining Magnetic Filtered Cathodic Arc Deposition with Ion Beam Sputtering to Afford Superhard TiSiN Multilayer Composite Films with Tunable Microstructure and Mechanical Properties