Abstract:Traditional semiconductor detectors such as silicon and germanium are easily affected by ambient temperature and charge-particle ion's radiation. They can't work stably in harsh environments such as high temperature and strong radiation for a long time. In this paper, 4H-silicon carbide detectors based on a Schottky barrier diode (SBD) were fabricated and the combined influences of high temperatures and heavy ion irradiation on 4H–SiC detectors have been investigated. With no radiation, the 4H–SiC detectors have excellent I–V characteristics performance during a temperature range of 30–200 °C. Even at an ambient temperature of 200 °C, the leakage current of the 4H–SiC detector was only 107 nA at the full depletion voltage. Then 280 KeV C 4+ heavy ions were used to irradiate the 4H-silicon carbide detectors, and the performances of the irradiated detectors were studied for different radiation doses from 1×10 13 to 1×10 16 ions/cm 2 in a certain higher ambient temperature environment. For the fully depleted 4H-silicon carbide detectors in an ambient temperature of 140 °C, both the I–V characteristics and the energy resolution have shown a certain radiation damage at the radiation fluence of 1×10 15 ions/cm 2 , while a significant deterioration was observed when the radiation fluence is up to 1×10 16 ions/cm 2 . It means that the 4H–SiC detectors can withstand an irradiation dose of 1×10 15 ions/cm 2 at 140 °C. The time-dependent I–V curves were also investigated for the irradiated detectors for a standing time up to 192 hours, and it's found that the irradiated detectors had minor changes in the leakage currents during a long time standing. A PN junction model with current and voltage equations was used to explain the phenomenon that the reverse leakage current increases with the increase of temperature. The surface recombination model was also used to explain the deterioration of I–V characteristics and energy resolution after irradiation.

Construction of an In-Situ Radiation Test System for Semiconductor Materials and Devices Based on a 4.5 MV Accelerator

Real-time and on-site γ-ray radiation response testing system for semiconductor devices and its applications

Ionizing Radiation Testing System for Emerging Semiconductor Materials and Devices

Nuclear Material Irradiation System of 4.5 MV Electrostatic Accelerator at Peking University

High-Dose Electron Radiation and Unexpected Room-Temperature Self-Healing of Epitaxial SiC Schottky Barrier Diodes

Development of a silicon carbide radiation detection system and experimentation of the system performance

4H-Silicon Carbide as particle detector for high-intensity ion beams

A Semi-Automated Real-Time Gamma Radiation Response Measurement System for Semiconductor Device Characterisation

Study of the characteristics of an irradiated 4H-SiC charge particle detector

Influence of heavy ion irradiation and high temperature on the performance of 4H–SiC Schottky barrier α particle detector

Performance of neutron-irradiated 4H-Silicon Carbide diodes subjected to Alpha radiation

TCAD Simulations of Radiation Damage in 4H-SiC

A beam-driven proton irradiation setup for precision radiation damage tests of silicon detectors

Mechanical properties of 6H-SiC irradiated by neutron and MeV heavy ions: A nanoindentation and finite element method study

Investigation of the Performance Degradation of 4H-SiC Neutron Detectors Using MCNP and TCAD

β -rays induced displacement damage on epitaxial 4H-SiC revealed by exciton recombination

A facility for radiation hardness studies based on a medical cyclotron

Characterisation of SiC radiation detector technologies with synchrotron X-rays

Ionization-induced annealing of pre-existing defects in silicon carbide

Effect of Very High-Fluence Proton Radiation on 6H-Sic Photoconductive Proton Detectors