Abstract:Efficient deep‐red perovskite light‐emitting diodes (PeLEDs) based on a vertical 3D/2D heterostructure perovskite are fabricated by p‐FPEAI post‐treatment. This involves forming a 2D capping layer on the original 3D perovskite surface to effectively passivate surface defects and improve the PLQY of emissive 3D perovskite. The optimized PeLED achieves the peak EQE of 22.2% with an emission peak at 674 nm. Metal halide perovskites hold a great promise for the development of electroluminescent and down‐conversion light‐emitting diodes (LEDs) owing to their easily tunable optical bandgaps, high photoluminescence quantum yields (PLQYs) and excellent color purity. 3D structural perovskites, valued for their high charge carrier transport capacity, have garnered much attention for high‐performance electroluminescent LEDs with low operating voltages. However, solution‐processed 3D perovskite films always suffer from the generation of defect‐induced trap states on the surfaces and at the grain boundaries, resulting in nonradiative recombination that detracts from the electroluminescence performance. Herein, a 3D/2D heterostructure is constructed to reduce the surface defects of CsPbIxBr3‐x based 3D perovskites by reconfiguring the surface of the 3D perovskite film with fluorine para‐substituted phenethylammonium iodine (p‐FPEAI). The analysis of charge carrier dynamics indicates a decrease in trap‐assisted nonradiative recombination and a notable increase in radiative recombination in the red 3D/2D perovskite films. Consequently, the cutting‐edge deep‐red LEDs with the resultant 3D/2D heterostructure perovskite as the emissive layer demonstrate a high external quantum efficiency of 22.2% and a very stable electroluminescence peak at 674 nm. The proposed p‐FPEAI‐assisted surface engineering is considered a resultful approach for advancing the development of high‐performance LEDs with perovskite heterojunction.

Deep‐Red Perovskite Light‐Emitting Diodes Based on One‐Step‐Formed Γ‐cspbi3 Cuboid Crystallites

Deep‐Red Perovskite Light‐Emitting Diodes with External Quantum Efficiency Exceeding 21% Enabled by Ligand‐Modulated Dimensionality Control

Bright and Stable Red Perovskite LEDs under High Current Densities.

High‐Quality γ‐CsPbI3 Cuboid Crystallites Grown by Amorphous‐Complex Conversion for Efficient and Bright Deep‐Red Light‐Emitting Diodes

Quasi‐2D CsPbBr X I 3− X Composite Thin Films for Efficient and Stable Red Perovskite Light‐Emitting Diodes

Highly Efficient Red Perovskite Light‐Emitting Diodes with Reduced Efficiency Roll‐Off Enabled by Manipulating Crystallization of Quasi‐2D Perovskites

Efficient Deep‐Red Perovskite Light‐Emitting Diodes Based on a Vertical 3D/2D Perovskite Heterojunction

Nucleophilic Reaction‐Enabled Chloride Modification on CsPbI3 Quantum Dots for Pure Red Light‐Emitting Diodes with Efficiency Exceeding 26 %

Modulation of Nucleation and Growth Kinetics of Perovskite Nanocrystals Enables Efficient and Spectrally Stable Pure-Red Light-Emitting Diodes

Highly Stable Mixed Halide Perovskite Nanocrystals for High Performance Pure‐Red Light‐Emitting Diodes

Spectrally Stable and Efficient Pure Red CsPbI 3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy

Stable, Efficient Red Perovskite Light-Emitting Diodes by (α, δ)-CsPbI<sub>3</sub> Phase Engineering

High-Efficiency Pure-Red Perovskite Quantum-Dot Light-Emitting Diodes.

Highly Efficient Pure‐Red Quasi‐2D Perovskite Light‐Emitting Diodes Enabled by Propylammonium Chloride Passivator

Efficient and Stable Red Perovskite Light‐Emitting Diodes via Thermodynamic Crystallization Control

Self‐Assembled Perovskite Nanowire Clusters for High Luminance Red Light‐Emitting Diodes

Multifunctional Ionic‐Ligand Regulated High‐Quality Γ‐cspbi3 Thin Films for Efficient and Bright Deep‐Red Light‐Emitting Diodes

Revealing the Vertical Structure of In-Situ Fabricated Perovskite Nanocrystals Films Toward Efficient Pure Red Light-Emitting Diodes

Stable, Efficient Red Perovskite Light-Emitting Diodes By (Alpha, Delta)-Cspbi3 Phase Engineering

Spectrally Stable and Efficient Pure Red CsPbI3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy

Red Perovskite Light‐emitting Diodes with Efficiency Exceeding 25% Realized by Cospacer Cations