Abstract:To investigate structural changes, the Cu95Fe5 alloy system was subjected to cooling rates of 1 × 1013 K/s, 2 × 1012 K/s, 2 × 1011 K/s, and 2 × 1010 K/s using the molecular dynamics simulation method. The results revealed that decreasing the cooling rate caused an increase in the phase transition temperature. Further, the structure of the alloy system exhibited a tendency towards increased stability following cooling at lower cooling rates. The Fe precipitation behavior of the Cu95Fe5 alloys during cooling at the rate of 2 × 1010 K/s was further explored, with the results suggesting that the formation and growth of the Fe cluster is a continuous process governed by the nucleation and growth mechanism. The size and number of Fe clusters formed at different stages were found to be affected by three factors, namely, the interaction force between the Fe atoms, the diffusion ability of the Fe atoms, and the interfacial energy between the Fe cluster and Cu matrix. When the alloy temperature exceeded 1400 K, the accumulation of the Fe atoms was facilitated by their strong interaction. However, the high temperatures and the large diffusion coefficient of the Fe atoms acted as inhibitors to the growth of Fe clusters, despite the intense thermal activities. As the temperature was reduced from 1400 K to 1050 K, the Fe atoms moved with a reduced intensity in a narrower area, and both the number of Fe atoms in the largest cluster and the number of clusters increased due to the action of the interaction force between the Fe atoms. Upon lowering the temperature from 1050 K to 887 K, the size of the largest Fe cluster increased rapidly, while the number of clusters decreased gradually. The growth of the largest Fe cluster could be partly attributed to the diffusion of single Fe atoms into the cluster under the action of the interaction force between the Fe atoms, in addition to the gathering and combination of multiple clusters. When the temperature was lowered from 967 K to 887 K, the diffusion coefficient of the Fe atoms approached 0, indicating that the non-diffusive local structure rearrangements of atoms dominated in the system structure change process. The interface energy governed the combination of the Fe clusters in this stage. At a temperature below 887 K, the alloy crystallized, the activities of the Fe atoms were reduced due to a low temperature, and the movement range of the Fe atoms was small at a fast cooling rate. As such, both the size and number of Fe clusters showed no obvious changes.

Molecular Dynamics Research on the Impact of Vacancies on Cu Precipitation in BCC-Fe

Deformation of Fe and Ag Precipitates in Cu Matrix

A Precipitation Hardening Model for Al-Cu-Cd Alloys

Effect of Vacancies on the Nucleation of Cr Precipitates at Grain Boundary in Α-Fe

Interface Structure Between Ag Precipitates and Cu Matrix and Its Effect on the Properties of the Cu-Ag Alloy

Molecular Dynamics Simulation Research on Fe Atom Precipitation Behaviour of Cu-Fe Alloys during the Rapid Solidification Processes

Molecular Dynamics Study on the Impact of Cu Clusters at the BCC-Fe Grain Boundary on the Tensile Properties of Crystal

Influence of vacancies on ageing effect in AuCd shape memory alloys

Density Functional Theory of Cu-Cr Alloy During Aging Precipitation Process at Low Temperature

Effect of Cu on Nanoscale Precipitation Evolution and Mechanical Properties of a Fe-NiAl Alloy.

Phase field study of effect of Al on Cu-rich precipitates in Fe-Cu-Mn-Al alloys

Vacancies effect on the mechanical properties in B2 FeAl intermetallic by the first-principles study

Modelling the spatial evolution of excess vacancies and its influence on age hardening behaviors in multicomponent aluminium alloys

First-principles calculations of Ag addition on the diffusion mechanisms of Cu-Fe alloys

Modeling of the Precipitation Kinetics During Aging a Predeformed Fe-Cu Alloy

Effect of Mg content on Cu precipitation behavior in Al-Cu-Mg ternary alloy by molecular dynamics simulation

Numerical Simulation of Copper Precipitation During Aging in Deformed Fe-Cu Alloys

Molecular Dynamical Simulation of the Behavior of Early Precipitated Stage in Aging Process in Dilute Cu–Cr Alloy

Molecular Dynamics Research on Fe Precipitation Behavior of Cu95Fe5 Alloys during Rapid Cooling

The tensile behaviors of Ag-Cu alloys with different Cu contents: Molecular dynamics simulations study

The effect of vacancy concentration on hydrogen diffusion in alpha-fe by molecular dynamics