Abstract:Recently, constructing proton transport channels has been considered an effective method to improve proton conductivity of high-temperature proton exchange membranes (PEM) with low phosphoric acid (PA)-doping levels. To construct proton transport channels, a metal–organic framework (MOF) is introduced into a polymer matrix. However, the MOF has poor compatibility with the polymer matrix as an inorganic substance. In this study, organic triazole-grafted poly(vinylbenzyl chloride) is synthesized and introduced into a cross-linked OPBI membrane to construct proton transport channels. Scanning electron microscopy (SEM) images show a homogeneous microstructure. Furthermore, proton transport channels are constructed in the membrane by introducing numerous triazole groups. The cross-linked OPBI has twice the proton conductivity of the linear OPBI, even with a low PA-doping level. All cross-linked membranes with a triazole group outperform OPBI membranes in terms of mechanical properties. The maximum power density of a single-cell test reaches 563 mW cm–2 at 160 °C under H2/O2, and it can be maintained for 500 h under a constant load of current discharge without manifest voltage degradation. These impressive results indicate that the moderately cross-linked membrane with triazole groups is one of the potential materials for PEM applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02173.Additional information, including materials and reagents; characterization methods; synthetic route; 1H NMR spectra; and gel fraction (PDF)This article has not yet been cited by other publications.

Construction of Proton Transport Highways Induced by Polarity-Driving in Proton Exchange Membranes to Enhance the Performance of Fuel Cells

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Constructing vertical proton transport channels in proton exchange membranes of fuel cells

The strategy of micropore confinement via organic macrocyclic cavities for designing novel high-performance proton exchange membranes

Structural and Transport Properties of Hydrophilic and Hydrophobic Modified Ionomers in Proton Exchange Membrane Fuel Cells

Effects of Conducting Channels Microstructure in Proton Exchange Membrane on the Performance of Fuel Cells

Carbonized Polymer Dots Assemble in Proton-Conducting Channels to Enhance the Conductivity and Selectivity Simultaneously for High-Performance Fuel Cells

Efficient lamellar two‐dimensional proton channels derived from dipole interactions in a polyelectrolyte membrane

Development of a High-Performance Proton Exchange Membrane:From Structural Optimization to Quantity Production

Construction of unimpeded proton-conducting pathways in solution-processed nanoporous polymer membranes

Facilitating Proton Transport with Enhanced Water Conservation Membranes for Direct Methanol Fuel Cells

Proton Conductive Channel Optimization In Methanol Resistive Hybrid Hyperbranched Polyamide Proton Exchange Membrane

Proton Transport, Electroosmotic Drag and Oxygen Permeation in Polytetrafluoroethylene Reinforced Ionomer Membranes and Their Effects on Fuel Cell Performance

Decisive Effect of Hydrophobic Rigid-Flexible Coupled Side Chains of Polycarbazoles on the Performance of Anion Exchange Membranes for Fuel Cells

The Key Role of Available Active Protons in Proton Conduction in Polyhydroxy Polymers

Constructing High-Performance Proton Transport Channels in High-Temperature Proton Exchange Membranes by Introducing Triazole Groups

Reinforced Poly(ether Ether Ketone)/nafion Composite Membrane with Highly Improved Proton Conductivity for High Concentration Direct Methanol Fuel Cells

Hydrophilic Channel Volume Behavior on Proton Transport Performance of Proton Exchange Membrane in Fuel Cells

Adjusting structure-activity relationship to obtain hybrid proton exchange membrane with enhanced transport efficiency by introducing functionalized nano-coated MOFs

Balancing proton and mass transfers in cathode catalyst layer of high-temperature proton exchange membrane fuel cell via gradient porous structure design

Spacer-engineering construction of continuous proton transport networks for cardo poly(biphenyl indole) high-temperature proton exchange membranes