Abstract:Metal organic frameworks (MOFs) have received considerable importance as proton conducting materials in recent times. However, most of the MOFs lack the ability to form film, which limits their application. In the present work, polybenzimidazole (PBI) composite membranes have been prepared by loading post synthetically modified (PSM) UiO-66-NH2 MOFs, denoted as PSM 1 and PSM 2 into an aryl ether-type polybenzimidazole (OPBI) polymer. The pristine OPBI, and MOF nanofiller loaded membranes were doped with phosphoric acid (PA) to prepare proton exchange membranes (PEMs). Use of thermally stable, hydrophilic MOFs resulted in enhanced proton conductivity, higher PA retention capacity, and increased stability against oxidative degradation for the composite membrane than the pristine OPBI polymer. The proton conductivities of the composite membranes (0.29 S cm–1 for PSM 1-10% and 0.308 S cm–1 for PSM 2-10% membranes at 160 °C, under anhydrous environment) were notably higher than the conductivities of the constituents and also higher than most of the MOF based polymer supported membranes. To the best of our knowledge, the PA doped PSM 2 loaded composite membrane shows the highest proton conductivity at 160 °C among all MOF based composite membranes. Extensive interfacial H-bonding plays the most crucial role behind the enhanced proton conductivities of the PA doped MOF containing polymer membranes reported here. This work clearly demonstrates the benefits of using rationally designed PSM 1 and PSM 2 MOFs as nanofiller to prepare OPBI supported membranes that can perform excellent proton conduction in a wide temperature range spanning up to 160 °C. This provides a generalized approach toward achieving an efficient proton conducting membrane for use in fuel cells.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.0c01322.Materials, synthesis of compounds, inherent viscosity, instrumentation and membrane characterization (PXRD, FT-IR, FESEM, TEM, TGA, and mechanical and tensile properties), water uptake, swelling ratio, PA doping levels, proton conductivity measurements (impedance spectroscopy Nyquist plot, and circuit fitting data tables), isothermal proton conductivity and acid leaching study, and literature survey (PDF)This article has not yet been cited by other publications.

Constructing High-Performance Proton Transport Channels in High-Temperature Proton Exchange Membranes by Introducing Triazole Groups

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Constructing stable continuous proton transport channels by in-situ preparation of covalent triazine-based frameworks in phosphoric acid-doped polybenzimidazole for high-temperature proton exchange membranes

Constructing highly durable proton transport channels in polybenzimidazole membranes using highly stable porous carbonized metal organic frameworks

Constructing proton transport channels in low phosphoric-acid doped polybenzimidazole membrane by introducing metal–organic frameworks containing phosphoric-acid groups

In situ etching strategy for the preparation of high-temperature proton-exchange membranes with continuous porous proton-transport channels

Constructing Proton Transfer Channels Using CuO Nanowires and Nanoparticles as Porogens in High-Temperature Proton Exchange Membranes

Fabricating a MOF Material with Polybenzimidazole into an Efficient Proton Exchange Membrane

Enhancing Comprehensive Performance of Crosslinked Pbi-Based High-Temperature Proton Exchange Membranes: Effectively Doping A Tetraphosphoric Acid Plasmonic Conductor

Construction of Novel Proton Transport Channels by Triphosphonic Acid Proton Conductor-Doped Crosslinked mPBI-Based High-Temperature and Low-Humidity Proton Exchange Membranes

Facile Preparation of Triazole-Functionalized Poly(arylene Perfluorophenyl) High Temperature Proton Exchange Membranes Via Para-Fluoro-thiol Click Reaction with High Radical Resistance

Spacer-engineering construction of continuous proton transport networks for cardo poly(biphenyl indole) high-temperature proton exchange membranes

Imidazole and triazine framed porous aromatic framework with rich proton transport sites for high performance high-temperature proton exchange membranes

Modification Strategies for Non-Aqueous, Highly Proton-Conductive Benzimidazole-Based High-Temperature Proton Exchange Membranes

Highly Conductive and Mechanically Stable Imidazole-Rich Cross-Linked Networks for High-Temperature Proton Exchange Membrane Fuel Cells

Incorporating 2D Porous Organic Polymer Nanosheets into High-Temperature Proton-Exchange Membranes for Low H3PO4 Loss

N-H Group-Rich Dendrimer Doped Polybenzimidazole Composite Membrane with Consecutive Proton Transportation Channels for HT-PEMFCs

In Situ Crosslinking of Polyoxometalate-Polymer Nanocomposites for Robust High-Temperature Proton Exchange Membranes

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Self-assembly of metal-organic framework onto nanofibrous mats to enhance proton conductivity for proton exchange membrane