Abstract:Additive manufacturing of parts on-site in space requires investigating the feasibility of adapting to zero-gravity and near-vacuum conditions, a technology applied today on Earth at standard conditions. While a few studies have been conducted for powder bed fusion, a feasibility study remains to be explored for direct energy deposition using a laser beam and a metal wire. This is the purpose of this study, which is conducted using a modeling approach based on computational fluid dynamics. The simulation model developed includes melting, re-solidification, vaporization, prediction of beam energy absorption as a function of the local surface temperature and curvature, ray tracing, tracking of free surface deformation and metal transfer, and wire-resistive heating. The study is carried out by starting from process parameters suited for stable on-Earth metal deposition. These conditions were also studied experimentally to validate the simulation model, leading to satisfactorily results. A total of three other test cases with ambient pressure lowered down to near-vacuum and/or gravitation down to zero are investigated. It is found that, compared to on-Earth conditions, in-space conditions can induce vaporization of the metal alloy that is large enough to result in a curvature of the melt pool free surface but too small to lead to the formation of a keyhole. The in-space conditions can also modify the force balance at the liquid melt bridge between the wire and the melt pool, leading to small changes in the curvature and temperature field at the free surface of the wire tip. Among the observed consequences are a small increase of the melt pool length and a small elevation of the bead height. More importantly, for process control, changing to in-space conditions might also affect the stability of the process, which could be assessed through the width of the liquid metal bridge. However, by using appropriate process control to maintain a continuous liquid metal bridge, it is concluded that direct energy deposition of metal using a laser and a wire could be used for manufacturing metal parts in-space in a tempered atmosphere.

Low-Roughness-Surface Additive Manufacturing of Metal-Wire Feeding with Small Power

Heat Input Adjustment Process for Unsupported Aluminum Alloy Lattice Struts Continuous Forming by Wire Arc-Directed Energy Deposition

Impact of Process Parameters on Forming Quality and Deposition Efficiency of Unsupported Rods in Wire Arc Additive Manufacturing

Improving mechanical strength and isotropy for wire-arc additive manufactured 304L stainless steels via controlling arc heat input

CFD-Based Feasibility Study of Laser-Directed Energy Deposition With a Metal Wire for On-Orbit Manufacturing

Investigation on Forming Process and Product Properties of Laser Wire-Feed Additive Manufacturing for High-Quality Metal Thin-Walled Parts

Research on Support-Free WAAM Based on Surface/interior Separation and Surface Segmentation

Robotic Wire-Based Friction Stir Additive Manufacturing

A novel high-dynamic actuator based in-situ micro-forging process for wire arc additive manufacturing of aluminum alloy

The Production of Three-Dimensional Metal Objects Using Oscillatory-Strain-Assisted Fine Wire Shaping and Joining

A Surface Quality Optimization Strategy Based on a Dedicated Melt-Pool Control Via the Dashed-Scan Contouring Technique in Electron Beam Powder Bed Fusion

Development of a Low-Cost Wire Arc Additive Manufacturing System

Advancements in Laser Wire-Feed Metal Additive Manufacturing: A Brief Review

A Review on Wire-Fed Directed Energy Deposition Based Metal Additive Manufacturing

Microstructural Evolution and Strengthening Mechanism of Low Re-Content Mg-Zn-Re-Zr Alloy Fabricated by Wire Arc Additive Manufacturing

Development of Wire + Arc Additive Manufacturing for the production of large-scale unalloyed tungsten components

Fused Plus Wire Arc Additive Manufacturing Materials and Energy Saving in Variable-Width Thin-Walled

Fabrication of Metallic Parts with Overhanging Structures Using the Robotic Wire Arc Additive Manufacturing

Surface wettability patterning of metal additive manufactured parts via laser-assisted functionalization

A Novel High-Efficiency Methodology for Metal Additive Manufacturing

Laser cleaning assisted wire arc additive manufacturing of aluminum alloy thin-wall through synchronous wire-powder deposition