Abstract:Tensile machine is a very sophisticated test equipment, which can test the mechanical properties of some materials. In the drawing machine, the clamping device is to prevent the relative displacement and vibration phenomenon in the process of tensile test. The clamping device is the most important part of the structure of the test machine, and the main task of the clamping device is to control the degree of freedom of the specimen needs to be clamped, so as to further add loads to the various specimens to be held, and finally complete the mechanical property test of the material. But at present, the existing fixture mechanism is mainly hydraulic, pneumatic, mechanical fixture. At present, the existing mechanical fixture still has bending stress during the clamping process, which will affect the accuracy of the experiment. Therefore, a clamping mechanism with adjustable clamping force and flat pushing is designed. An electric control type fixture mechanism is very rare, so in this paper, an electrically controlled fixture is designed on this basis. The main contents are as follows: (1) On the basis of the existing fixture types, the working mode of the fixture is studied, and the working principle related to the fixture is mastered. (2) The main components of the fixture mechanism are analysed, the design scheme is determined, and the selection of the components of the drive part and the selection of the related components within the fixture mechanism is completed. ( 3) The force analysis of the main body of the fixture is carried out by using theoretical mechanics knowledge, and the relevant calculations are completed. The solid modeling of the whole mechanism is completed by using SolidWorks. The force analysis of key parts is carried out by using ANSYS software, and the correctness and safety of material selection and design are verified. The main parts of the fixture mechanism to complete the corresponding force analysis, and the theoretical calculation results are compared and verified, and finally realize the electric control of the fixture mechanism and complete the design of the fixture mechanism.

Linkage type handle and foot stool electronic device

Kinematics and dynamicsanalysis for slotting machine six bar linkage

Design and Analysis of Double-station Fixture with Rolling/Sliding-toggle Force Amplifier Mechanism

Design and Analysis of Folding Mechanism for Intelligent Wheelchair-Stretcher Robot

A kind of face's electronic massage device

Linkage under-actuated humanoid robotic hand linkage under-actuated humanoid robotic hand

Design and Development of Composite Linkage Mechanism for Cable-Driven Segmented Manipulator to Increase Synchronous Accuracy and Transmission Distance

Design and Research of Intelligent Fixture for Drawing Machine

A novel coupled gesture-changeable under-actuated robotic finger with linkage and gear-rack mechanism

An indirect style linkage under-actuated humanoid robot hand

Micro-screw fastening handle

Flexible sheet based six-degree-of-freedom parallel precision adjustment device

A multi-functional machine illustrating the principles of teaching aids

Linkage Under-Actuated Humanoid Robotic Hand with Control of Grasping Force

Hand-operated positioning mechanism for car body welding

Automatic Extension Mechanism of Multilevel Extensible Folding Plate Cabin

Hand machine tool with an ergonomic handle

Design of Linear Parallel and Self-Adaptive Hand with Y-Shaped Linkage Mechanisms.

Design, Analysis, and Experiment of a Coupled-Adaptive Underactuated Prosthetic Handbased on Linkage Mechanisms

Hydraulic automatic pin pulling device

Micro-feed Mechanism with High-Resolution and Large-Stroke Based on Friction Drive