Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Design and Development of Composite Linkage Mechanism for Cable-Driven Segmented Manipulator to Increase Synchronous Accuracy and Transmission Distance

Development of a linear decoupling cable-driven manipulator with independent driving joints ,

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

Development of a Cable-Driven Redundant Space Manipulator with Large Bending Angle by Combining Quaternion Joints and Segmented Coupled Linkages Mechanism

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Design and modeling of motion-decoupling mechanism for cable-driven joints

Design and Analysis of a High-Payload Manipulator Based on a Cable-Driven Serial-Parallel Mechanism

Dynamic Modeling and Experimental Verification of a Cable-Driven Continuum Manipulator with Cable-Constrained Synchronous Rotating Mechanisms

A Novel Cable-Driven Joint Module for Space Manipulators: Design, Modeling, and Characterization

Dynamics Modeling and Analysis of Cable-Driven Segmented Manipulator Considering Friction Effects

Design and Analysis of 7-DOF Cable-Driven Manipulator

Efficient Inverse Kinematics and Planning of a Hybrid Active and Passive Cable-Driven Segmented Manipulator

A Novel Cable-Driven Manipulator with Constant-Curvature Deflections and Equal Displacements of the Antagonistic Cables

Design And Analysis Of A Lightweight Flexible Cable-Driven Manipulator

Hybrid Tension-Position Control of Cable-Driven Serial Manipulator to Improve Accuracy and Avoid Cable Slack and Breakage

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Analysis and Validation of a Flexible Limb/Cable Hybrid-Driven Parallel Continuum Manipulator

Dynamic modeling and trajectory tracking control method of segmented linkage cable-driven hyper-redundant robot

Design of a Cable Driven Floating Robotic Arm with Continuum Joints.

Stiffness Optimization of Cable-Driven Humanoid Manipulators

Kinematic analysis and design optimization of a cable-driven universal joint module