Abstract:Abstract Purpose The expanded endoscopic endonasal approach, a representative example of keyhole brain surgery, allows access to the pituitary gland and surrounding areas through the nasal and sphenoid cavities. Manipulating rigid instruments through these constrained spaces makes this approach technically challenging, and thus, a handheld robotic instrument could expand the surgeon’s capabilities. In this study, we present an intuitive handle prototype for such a robotic instrument. Methods We have designed and fabricated a surgical instrument handle prototype that maps the surgeon’s wrist directly to the robot joints. To alleviate the surgeon’s wrist of any excessive strain and fatigue, the tool is mounted on the surgeon’s forearm, making it parallel with the instrument’s shaft. To evaluate the handle’s performance and limitations, we constructed a surgical task simulator and compared our novel handle with a standard neurosurgical tool, with the tasks being performed by a consultant neurosurgeon. Results While using the proposed handle, the surgeon’s average success rate was $$80\%$$ 80 % , compared to $$41\%$$ 41 % when using a conventional tool. Additionally, the surgeon’s body posture while using the suggested prototype was deemed acceptable by the Rapid Upper Limb Assessment ergonomic survey, while early results indicate the absence of a learning curve. Conclusions Based on these preliminary results, the proposed handle prototype could offer an improvement over current neurosurgical tools and procedural ergonomics. By redirecting forces applied during the procedure to the forearm of the surgeon, and allowing for intuitive surgeon wrist to robot-joints movement mapping without compromising the robotic end effector’s expanded workspace, we believe that this handle could prove a substantial step toward improved neurosurgical instrumentation.

Hand machine tool with an ergonomic handle

Assessment of ergonomically designed handle shapes for low-frequency vibration responses

Ergonomic Design and Assessment of an Improved Handle for a Laparoscopic Dissector Based on 3D Anthropometry

Overcast with ergonomic handle

Individual customization strategy accomplished by developing prototype of a laparoscopic forceps handle using additive manufacturing

Evaluation of handle design characteristics in a maximum screwdriving torque task

Design of Humanoid Robotic Hand Based on Link Underactuation

A new robotic hand based on the design of fingers with spatial motions

Comfort Optimization Method for Work Equipment Based on a Digital Hand Model

Analysis of Human-Machine Design of Hand-Grasp Apparatus

Analysis of the Handle Cross-section Design of Cordless Drill Screwdriver

Design of 3D Printed Cellular Meta-materials for Improved Tool-Handle Ergonomics

An Anthropomorphic Design Guideline for the Thumb of the Dexterous Hand

Interdisciplinary Approach to Tool-Handle Design Based on Medical Imaging

Five-fingered Hand with Wide Range of Thumb Using Combination of Machined Springs and Variable Stiffness Joints

Designing a Mechanical Tool for Robots with 2-Finger Parallel Grippers

A Mechanical Screwing Tool for 2-Finger Parallel Grippers -- Design, Optimization, and Manipulation Policies

An intuitive surgical handle design for robotic neurosurgery

Improved usability of a new handle design for laparoscopic dissection forceps

Optimization of Product Handle Material Mechanical Properties for Improved Ergonomics Using Finite Element Method and Subjective Response

Super Under-Actuated Humanoid Robot Hand with Gear-Rack Mechanism