Abstract:Nowadays, the MA-FA mixed-cation perovskite solar cells (PSCs), demonstrating much higher stability than that of single-cation MAPbI(3) or FAPbI(3), are still encountering a low-efficiency issue. The main reason is that there existing a lot of defects in SnO2 electron transport layers (ETLs) and perovskite absorbers. Herein, we develop a synergistic strategy of Rubidium Chloride (RbCl) doping and 4-tert-butylbenzylammonium iodide (tBBAI) passivation to fabricate high-performance MA(x)FA(1-x)PbI(3) mixed-cation PSCs. The alkali halide RbCl is first selected as a novel doping additive to regulate the film properties of SnO2 and perovskites. Research shows that the negative Cl- ions can combine with uncoordinated Sn4+ ions due to their strong bonding ability, which can passivate the oxygen-vacancy-related defects and enhance the charge transport of SnO2 ETLs. Meanwhile, the doped Rb+ and Cl- ions may diffuse into perovskite lattices to promote grain growth and reduce the defects of perovskites. Besides, we employ an organic halide salt tBBAI to passivate perovskites and suppress surface defects. Results of deep level transient spectroscopy (DLTS) indicate that SnO2 and SnO2-RbCl based devices have deeper hole traps and large trap densities (Delta E = 0.92 eV, N-T = 1.10 x 10(16) cm(-3); Delta E = 0.93 eV, N-T = 2.16 x 10(15) cm(-3)); while tBBAI-treated SnO2-RbCl-based devices own a shallower hole trap and a smaller trap density (Delta E = 0.72 eV, N-T = 2.44 x 10(13) cm(-3)); and the corresponding IPb and I-(MA/FA) antisite defeats are also identified. Therefore, our synergistic strategy is effectively able to reduce the defect density and suppress the non-radiative recombination. Consequently, the best-performance MA(0.85)FA(0.15)PbI(3) PSCs achieve an impressive power conversion efficiency (PCE) of 22.54% with a large open circuit voltage (V-oc) of 1.16 V, which are by far the highest values of MA(0.85)FA(0.15)PbI(3) mixed-cation PSCs.

Synergetic effects of DMA cation doping and Cl anion additives induced re-growth of MA<sub>1-<i>x</i></sub>DMA<sub><i>x</i></sub>PbI<sub>3</sub> perovskites

Synergistic effect of MACl and DMF towards efficient perovskite solar cells

Synergistic Strategy of Rubidium Chloride Regulated Sno2and 4-Tert-butyl-benzylammonium Iodide Passivated Maxfa1-Xpbi3 for Efficient Mixed-Cation Perovskite Solar Cells

Methylammonium Chloride as a Double‐Edged Sword for Efficient and Stable Perovskite Solar Cells

Boosting Photovoltaic Properties and Intrinsic Stability for MA-Based Perovskite Solar Cells by Incorporating 1,1,1-Trimethylhydrazinium Cation.

Dimethylammonium additives alter both vertical and lateral composition in halide perovskite semiconductors

Formamidinium lead triiodide perovskites with improved structural stabilities and photovoltaic properties obtained by ultratrace dimethylamine substitution

Mechanism of the Dimethylammonium Cation in Hybrid Perovskites for Enhanced Performance and Stability of Printable Perovskite Solar Cells

Effects of Formamidinium and Bromide Ion Substitution in Methylammonium Lead Triiodide Toward High-Performance Perovskite Solar Cells

Enhanced Performance and Stability of Carbon Counter Electrode-Based MAPbI 3 Perovskite Solar Cells with p -Methylphenylamine Iodate Additives

Suppressing Ion Migration by Synergistic Engineering of Anion and Cation towards High‐Performance Inverted Perovskite Solar Cells and Modules

Benefitting from Synergistic Effect of Anion and Cation in Antimony Acetate for Stable CH3 NH3 PbI3 -Based Perovskite Solar Cell with Efficiency Beyond 21

Crystallization and Defect Chemistry Dual Engineering for MAPbI 3 Perovskite Solar Cells with Efficiency Approaching 22%

The Role of Dimethylammonium Iodine in CsPbI3 Perovskite Fabrication: Additive or Dopant?

The Effect of Methyl Ammonium Chloride Doping for Perovskite Solar Cells on Structure, Crystallization and Power Conversion Efficiency

Benefitting from Synergistic Effect of Anion and Cation in Antimony Acetate for Stable CH3NH3PbI3-Based Perovskite Solar Cell with Efficiency Beyond 21%

Revealing the stability and efficiency enhancement in mixed halide perovskites MAPb(I$_{1-x}$Cl$_x$)$_3$ with ab initio calculations

Enhanced efficiency of perovskite solar cells by introducing controlled chloride incorporation into MAPbI3 perovskite films

Selectively Localized Growth of Two-Dimensional Perovskites at Grain Boundaries for Efficient and Stable CsPbI3 Perovskite Solar Cells

MACl-Induced Controlled Crystallization in Sequentially Deposited Perovskites for High-Efficiency and Stable Perovskite Solar Cells

Impacts of MAPbBr3 Additive on Crystallization Kinetics of FAPbI3 Perovskite for High Performance Solar Cells