Abstract:Abstract As gas turbine inlet temperature continuously increases, blade trailing edge suffers an extremely high thermal load due to the thin structure and constraint of internal convective cooling arrangements. To overcome these difficulties, pressure-side cutback, which is strengthened with multiple internal structures and land extensions, is widely used in blades to protect trailing edge from high thermal stresses. Due to the geometrical complexity and strong interactions between coolant flow and mainstream, sophisticated heat transfer and flow patterns exist in the cutback region, which presents a great challenge for the trailing edge cutback design. To understand the heat transfer and aerodynamic performance in blade with trailing edge cutback, CFD method has become an efficient tool which provides deep insights into the flow mechanisms and heat transfer characteristics in the detailed region. To accurately resolve the flow and heat transfer performance in a turbine blade with trailing edge cutback, structured grids are preferred because of higher resolution in flow/heat transfer prediction than unstructured grids, especially in boundary layers. However, for a blade with landed trailing edge cutback, few researchers tried to employ structured grids to predict aero-thermal performance due to the geometrical complexity. In this paper, the Background-Grid Based Mapping (BGBM) method proposed in Part I of this study was adopted to generate multi-block structured grids for a gas turbine vane with landed trailing edge cutback. With the coordinate transformation strategies, multi-block structured grids for the vane with landed trailing edge cutback were generated conveniently. With the generated structured grids, flow and heat transfer performance in vane were investigated using RANS (Reynolds-Averaged Navier-Stokes) equations solutions combined with transitional turbulence model. Effects of land extensions on the heat transfer and aerodynamic performance were analyzed, as well as the effects of inflow turbulence intensity, mainstream Reynolds number and ejection rate. The results show that heat transfer coefficients on vane surface, total pressure loss coefficient and energy loss coefficient in vane are all increased with the increase of inflow turbulence intensity. However, heat transfer coefficients on cutback and trailing edge surface are not sensitive to inflow turbulence intensity. At the same inflow turbulence intensity, the aerodynamic loss in vane is decreased with increasing the Reynolds number of mainstream. The increase of ejection rate significantly increases the heat transfer coefficients on cutback surface. Compared with the vane without land extensions, heat transfer coefficients and pressure coefficients on vane surface are reduced and the heat transfer coefficients on cutback surface are increased for the vane with land extensions. In the case of Re = 2.0 × 106, the area-averaged heat transfer coefficient on landed cutback is 14.46% higher than the cutback without lands. Compared with the experimental data, predictions with structured grids based on BGBM method are more agreeable than those with unstructured grids.

Film Cooling in the Trailing Edge Cutback with Different Land Shapes and Blowing Ratios

Numerical Study On Film Cooling And Convective Heat Transfer Characteristics In The Cutback Region Of Turbine Blade Trailing Edge

Effects of Blowing Ratios and Lip Thicknesses on Film Cooling for Trailing Edge Cutback with Latticework Ducts

Delayed-Detached Eddy Simulations of Film Cooling Effect on Trailing Edge Cutback with Land Extensions

Film cooling in the cutback for trailing edge with different incident angles

Experimental investigations on cooling characteristics of different trailing-edge cutback geometries

Experimental and unsteady numerical investigations on cooling characteristics of trailing-edge cutback with effect of upstream film holes

Film cooling enhancement over oblong-dimpled cutback surfaces for the trailing edge of turbine blades

Unsteady Investigations on Cooling Performance of a Gas Turbine Tailing Edge Cut-Back

DES study of the unsteady flow and film cooling at trailing edge cutback with various internal rib configurations

Investigations into Film Cooling and Unsteady Flow Characteristics in a Blade Trailing-Edge Cutback Region

Cutback Squealer Tip Trailing Edge Cooling Performance

Background-Grid Based Mapping Approach to Film Cooling Meshing: Part II \u2014 Applications in Vane with Landed Trailing-Edge Cutback

Experimental investigation of hole-geometry effect on unsteady characteristics of film cooling at turbine vane leading edge

Numerical Investigation Of Coolant-To-Mainstream Scaling Parameters With Film Cooling On Pressure And Suction Side Of A Gas Turbine Blade

Numerical Simulation for Heat Transfer Properties at Trailing Edge of Gas Turbine Airfoils

Effect of leading edge diameter ratio and mainstream Reynolds number on film cooling performance of rotating blade leading edge

Numerical Study of Film Cooling at the Outlet of Gas Turbine Exhaust

Impact of Different Film-Cooling Modes at Leading Edge on the Aerodynamic and Heat Transfer Performance of Heavy Duty Gas Turbine

Film Cooling Performances Under Various Upstream Roughness Conditions: Experimental Investigations and Similarity Hypothesis

Effects of Trenched Film Hole Configurations on the Endwall Film Cooling and Suction Side Phantom Cooling