Abstract:Dimethyl carbonate is an eco-friendly essential chemical that can be sustainably produced from CO2, which is available from carbon capture activities or can even be captured from the air. The rapid increase in dimethyl carbonate demand is driven by the fast growth of polycarbonates, solvent, pharmaceutical, and lithium-ion battery industries. Dimethyl carbonate can be produced from CO2 through various chemical pathways, but the most convenient route reported is the indirect alcoholysis of urea. Previous research used techniques such as heat integration and reactive distillation to reduce the energy use and costs, but the use of an excess of methanol in the trans-esterification step led to an energy intensive extractive distillation required to break the dimethyl carbonate-methanol azeotrope. This work shows that the production of dimethyl carbonate by indirect alcoholysis of urea can be improved by using an excess of propylene carbonate (instead of an excess of methanol), a neat feat that we showed it requires only 2.64 kW·h·kg−1 dimethyl carbonate in a reaction-separation-recycle process, and a reactive distillation column that effectively replaces two conventional distillation columns and the reactor for dimethyl carbonate synthesis. Therefore, less equipment is required, the methanol-dimethyl carbonate azeotrope does not need to be recycled, and the overall savings are higher. Moreover, we propose the use of a reactive distillation column in a heat integrated process to obtain high purity dimethyl carbonate (> 99.8 wt-%). The energy requirement is reduced by heat integration to just 1.25 kW·h·kg−1 dimethyl carbonate, which is about 52% lower than the reaction-separation-recycle process. To benefit from the energy savings, the dynamics and control of the process are provided for ±10% changes in the nominal rate of 32 ktpy dimethyl carbonate, and for uncertainties in reaction kinetics.

Design and Optimization of Reactive Dividing-Wall Extractive Distillation Process for Dimethyl Carbonate Synthesis Based on Quantum Chemistry and Molecular Dynamics Calculation

Process optimization of CO2membrane and cryogenic hybrid separation

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Design and Control of Dimethyl Carbonate−Methanol Separation via Extractive Distillation in the Dimethyl Carbonate Reactive-Distillation Process

Study on a New Reactive Dividing-Wall Column for the Reaction of Vinyl Carbonate and Methanol Ester Exchange to Produce Dimethyl Carbonate

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Optimization and Energy-Saving Design for Dimethyl Carbonate Production by Combining with Various Special Distillation Routes of Reactive Distillation

Energy-saving extractive distillation system using o-xylene as an entrainer for the high-purity separation of dimethyl carbonate/methanol azeotrope

Co-Production of Dimethyl Carbonate, Dimethoxymethane and Dimethyl Ether from Methanol: Process Design and Exergy Analysis

Experimental and modeling studies on a homogeneous reactive distillation system for dimethyl carbonate synthesis by transesterification

Process Design, Economic Optimization, and Environmental Assessment for the Production of Glycerol Carbonate Via Reactive Distillation Combined with Pervaporation

Design and multi-objective optimization of hybrid extractive distillation process for separating the toluene-methanol-water ternary azeotrope

Energy-saving Investigation for Diethyl Carbonate Synthesis Through the Reactive Dividing Wall Column Combining the Vapor Recompression Heat Pump or Different Pressure Thermally Coupled Technique

Sustainable Process Design and Multi-Objective Optimization of Efficient and Energy-Saving Separation of Xylene Isomers Via Extractive Distillation Based on Double Extractants

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Multi-objective optimization of sustainable extractive dividing-wall column process for separating methanol and trimethoxysilane azeotrope mixture

Design and multi-objective optimization of hybrid reactive-extractive distillation process for separating wastewater containing benzene and isopropanol

Novel eco-efficient reactive distillation process for dimethyl carbonate production by indirect alcoholysis of urea

Simulation and optimization of DMC synthesis process based on conventional and advanced exergy analyses

Towards sustainable separation of the ternary azeotropic mixture based on the intensified reactive-extractive distillation configurations and multi-objective particle swarm optimization