Abstract:This study introduces a groundbreaking Ti‐doped cathode material with anion redox activity, namely Na2/3Li2/9Mn53/72Ti1/24O2, designed for application in sodium‐ion batteries. Notably, this material exhibits outstanding cycling stability, retaining 85.4% of its capacity after 100 cycles at 0.5C, where 1C corresponds to 200 mA g−1. Through quantitative analysis, the optimized performance of this cathode material stems from the enhanced O 2p and Mn 3d orbits, highlighting the contributions from both Mn‐ and O‐redox processes is ascertained. Sodium layered oxide with anion redox activity (SLO‐A) stands out as a promising cathode material for sodium‐ion batteries due to its impressive capacity and high voltage resulting from Mn‐ and O‐redox processes. However, the SLO‐A faces significant challenges in cycling stability and rate performance, primarily due to the poor reversibility and sluggish kinetics of the O‐redox. In this study,a novel Ti‐doped material, Na2/3Li2/9Mn53/72Ti1/24O2 (NLMTO), exhibiting remarkable characteristics such as a notable rate capacity (130 mAh g−1 at 3C, where 1C equals 200 mA g−1) and excellent cycling retention (85.4% after 100 cycles at 0.5C) is introduced. Employing electrochemical differential analyses, the contributions to the superior performance arising from the Mn‐ and O‐redox processes are quantitatively delineated. The optimized performance of NLMTO is attributed, in part, to the enhanced stability of both bulk and interface structures. The introduction of Ti through substitution not only contributes to this stability but also allows for the fine‐tuning of the material's electron configurations. This is achieved by augmenting the density of states near the Fermi energy level, as well as elevating the O 2p and Mn 3d orbits. This research advances sodium‐ion battery technology.

Integrated Titanium-Substituted Air Stable O3 Sodium Layered Oxide Electrode Via a Complexant Assisted Route for High Capacity Sodium-Ion Battery

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Ti4+ Substitution Suppressing P2-O2 Phase Transition to Construct Stable P2-Na0.67ni0.33mn0.67o2 Cathode for Long-Term Durable Sodium-Ion Batteries

Stabilized O3‐Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual‐Site Ti4+/K+ Substitution

NaTiOx‐modified high‐nickel layered oxide cathode for stable sodium‐ion batteries

Titanium Substitution Facilitating Oxygen and Manganese Redox in Sodium Layered Oxide Cathode

Stabilized O3-Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual-Site Ti<SUP>4+</SUP>/K<SUP>+</SUP> Substitution

Effect of Ti doping on the structural and electrochemical performance of O3-type Na(Ni0.3Fe0.2Mn0.5)1-xTixO2 cathode materials for sodium-ion batteries

Ti-Substituted O3-NaNi0.5Mn0.3Ti0.2O2 Material with a Disordered Transition Metal Layer and a Stable Structure

Electrochemical performance and structural stability of air-stable Na0.67Ni0.33Mn0.67-xTixO2 cathode materials for high-performance sodium-ion batteries

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

High-entropy configuration of O3-type layered transition-metal oxide cathode with high-voltage stability for sodium-ion batteries

Insights into Ti doping for stabilizing the Na2/3Fe1/3Mn2/3O2 cathode in sodium ion battery

In Situ Raman Spectroscopy Reveals the Mechanism of Titanium Substitution in P2–Na2/3Ni1/3Mn2/3O2: Cathode Materials for Sodium Batteries

Enhanced Rate Performance and Available Specific Capacity of the O3-NaNi0.5Mn0.3Ti0.2O2 Cathode by K Substitution for Sodium-Ion Batteries

Deciphering the Origin of High Electrochemical Performance in a Novel Ti-Substituted P2/O3 Biphasic Cathode for Sodium-Ion Batteries

Ti-Substituted Layered O3 NaCr1-xTixO2 as High-Rate-Capability Cathode Materials for Sodium Ion Batteries

Suppression of Adverse Phase Transition of Layered Oxide Cathode via Local Electronic Structure Regulation for High-Capacity Sodium-Ion Batteries

Enhanced Rate Performance and Available Specific Capacity of the O3-NaNi 0.5 Mn 0.3 Ti 0.2 O 2 Cathode by K Substitution for Sodium-Ion Batteries

Complementary Effect of Ti and Ni Incorporation in Improving the Electrochemical Performance of a Layered Sodium Manganese Oxide Cathode for Sodium-Ion Batteries

Synergistic activation of anionic redox through substitution strategy to design low-cost Co/Ni-free layered oxide cathode materials for high-performance Na-ion batteries