Abstract:This study introduces a groundbreaking Ti‐doped cathode material with anion redox activity, namely Na2/3Li2/9Mn53/72Ti1/24O2, designed for application in sodium‐ion batteries. Notably, this material exhibits outstanding cycling stability, retaining 85.4% of its capacity after 100 cycles at 0.5C, where 1C corresponds to 200 mA g−1. Through quantitative analysis, the optimized performance of this cathode material stems from the enhanced O 2p and Mn 3d orbits, highlighting the contributions from both Mn‐ and O‐redox processes is ascertained. Sodium layered oxide with anion redox activity (SLO‐A) stands out as a promising cathode material for sodium‐ion batteries due to its impressive capacity and high voltage resulting from Mn‐ and O‐redox processes. However, the SLO‐A faces significant challenges in cycling stability and rate performance, primarily due to the poor reversibility and sluggish kinetics of the O‐redox. In this study,a novel Ti‐doped material, Na2/3Li2/9Mn53/72Ti1/24O2 (NLMTO), exhibiting remarkable characteristics such as a notable rate capacity (130 mAh g−1 at 3C, where 1C equals 200 mA g−1) and excellent cycling retention (85.4% after 100 cycles at 0.5C) is introduced. Employing electrochemical differential analyses, the contributions to the superior performance arising from the Mn‐ and O‐redox processes are quantitatively delineated. The optimized performance of NLMTO is attributed, in part, to the enhanced stability of both bulk and interface structures. The introduction of Ti through substitution not only contributes to this stability but also allows for the fine‐tuning of the material's electron configurations. This is achieved by augmenting the density of states near the Fermi energy level, as well as elevating the O 2p and Mn 3d orbits. This research advances sodium‐ion battery technology.

In Situ Raman Spectroscopy Reveals the Mechanism of Titanium Substitution in P2–Na2/3Ni1/3Mn2/3O2: Cathode Materials for Sodium Batteries

Deciphering the Origin of High Electrochemical Performance in a Novel Ti-Substituted P2/O3 Biphasic Cathode for Sodium-Ion Batteries

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Optimal Ti-Substitution in Layered Oxide Cathodes for Na-Ion Batteries

Ti4+ Substitution Suppressing P2-O2 Phase Transition to Construct Stable P2-Na0.67ni0.33mn0.67o2 Cathode for Long-Term Durable Sodium-Ion Batteries

Investigation of Ti-substitution and MnPO4 coating effects on structural and electrochemical properties of P2-Na0.67TixNi0.33Mn0.67-xO2 cathode materials

Insights into Ti doping for stabilizing the Na2/3Fe1/3Mn2/3O2 cathode in sodium ion battery

Titanium Substitution Facilitating Oxygen and Manganese Redox in Sodium Layered Oxide Cathode

Unraveling the Critical Role of Ti Substitution in P2-NaxLiyMn1–yO2 Cathodes for Highly Reversible Oxygen Redox Chemistry

Structural and Electrochemical Properties of Layered P2-Na0.8Co0.8Ti0.2O2 Cathode in Sodium-Ion Batteries

On controlling the P2-O2 phase transition by optimal Ti-substitution on Ni- site in P2-type Na0.67Ni0.33Mn0.67O2 (NNMO) cathode for Na-ion batteries

Insights into the Ti4+ Doping in P2-type Na0.67Ni0.33Mn0.52Ti0.15O2 for Enhanced Performance of Sodium-Ion Batteries

Suppressing the P2‐O2 phase transition and Na+/vacancy ordering in Na0.67Ni0.33Mn0.67O2 by a delicate multicomponent modulation strategy

Manipulating of P2/O3 Composite Sodium Layered Oxide Cathode through Ti Substitution and Synthesis Temperature

Probing the Structural Transition Kinetics and Charge Compensation of the P2-Na0.78Al0.05Ni0.33Mn0.60O2 Cathode for Sodium Ion Batteries.

Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium

Synergistic activation of anionic redox through substitution strategy to design low-cost Co/Ni-free layered oxide cathode materials for high-performance Na-ion batteries

Cu-substitution P2-Na0.66Mn1-xCuxO2 Sodium-Ion Cathode with Enhanced Interlayer Stability

Enhancing the Structure Stability and Sodium Storage Performance of P2-Na2/3Ni1/3Mn2/3O2 Via Ti-doped

Ti‐Substituted NaNi0.5Mn0.5‐xTixO2 Cathodes with Reversible O3−P3 Phase Transition for High‐Performance Sodium‐Ion Batteries