Abstract:Solid-state transformer (SST) and hybrid transformer (HT) are promising alternatives to the line-frequency transformer (LFT) in smart grids. The SST features medium-frequency isolation, full controllability for voltage regulation, reactive power compensation, and the capability of battery energy storage system (BESS) integration with multiport configuration. The HT has a partially rated converter for fractional controllability and can integrate a small BESS. Fast grid-edge voltage fluctuations from increased solar photovoltaic (PV) and electric vehicle (EV) penetration are difficult to manage for mechanical load tap changers. Hence, along with the trend toward more BESS in the grid, the controllability and the storage-integration capability of the SST and HT are of strong interest. However, a review of literature shows existing SST and HT research is mostly at converter level, while system-level assessments are scarce. Assessing technical and economic impacts is critical to understanding the benefits and role of the SST and HT to guide future research, which is presented for the first time in this article. Experimental results from medium-voltage (MV) SST and MV HT prototypes are shown to confirm equipment-level feasibility, where the voltage controllability waveforms of an MV HT prototype are reported for the first time. Comparative simulations are performed on a modified IEEE 34-bus system. A grid-model-less decentralized grid-edge voltage control method and a day-ahead BESS dispatch method are proposed for the SST and HT. The simulations show that the SST and HT with integrated storage can host more PV, achieve peak shaving, mitigate voltage fluctuation and reverse power flow, and support energy arbitrage for operational cost reduction, compared to the LFT. Moreover, comprehensive analyses of net present value (NPV) and internal rate of return (IRR) are performed under different installed PV capacities, HT’s partial converter ratings, and BESS capacities. Sensitivities to future cost reductions of the PV and BESS are studied. Although the NPV and IRR are currently negative, 60% capital cost reduction or 150% revenue increase will make the SST and HT economically viable in the use case studied.

Hardware Design of a 13.8-Kv/3-mva PV Plus Storage Solid-State Transformer (PVS-SST)

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

A Soft-Switching Solid-State Transformer Module

A Soft Start Approach of Solid-State Transformer

A 3-Kw Two-Stage Transformerless PV Inverter with Resonant DC Link and ZVS-PWM Operation

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

Design and experiment of a zero-voltage-switching module for bidirectional DC solid-state transformer

A Five-level AC/DC Converter for MV Solid-State Transformer

New single‐stage bidirectional three‐phase ac‐dc solid‐state transformer

99.1% Efficient 10 kV SiC-Based Medium-Voltage ZVS Bidirectional Single-Phase PFC AC/DC Stage

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

A Three-Phase Isolated Building Block for High-Power Medium-Voltage Grid Applications

Solid-State Transformer and Hybrid Transformer with Integrated Energy Storage in Active Distribution Grids: Technical and Economic Comparison, Dispatch, and Control

A Transformerless Intelligent Power Substation: A three-phase SST enabled by a 15-kV SiC IGBT

MMC Based Solid State Transformer for Large-Scale Distributed PV Integration and Medium Voltage AC/DC Interconnection

Back-to-Back H-Bridge Cell Based Modular Solid State Transformer with High-Frequency Link

Three-phase Voltage Source Converters Based on Series-Connected Power devices for Medium Voltage Variable Speed Drives.

Integration of PV Panels and EV Chargers on the Modular Multilevel Converter Based SST

A Modular Multilevel Converter with Boosting, Self-Balancing, and Scaling Capabilities for High- Voltage Transformerless PV Applications