Abstract:High-voltage (HV) wide bandgap (WBG) silicon carbide (SiC) power modules, capable of higher switching frequencies and thermal stresses than their silicon-based counterparts, are well suited for the next generation of highly-efficient power converters for medium-voltage (MV) grid applications. HV SiC power modules allow for simpler two-level HV converter topologies reducing control and system-level complexity while increasing power density, efficiency, and reliability. Furthermore, modular designs are also possible for multi-level converters at 15 kV-class distribution voltages and beyond. Both 10-kV and 6.5-kV SiC MOSFETs are leading candidates for developing multiple MV grid applications. This paper presents the design and test of a two-level DC-DC solid-state transformer (SST) based on 3rd-generation 10-kV SiC power modules as a building block for MV power conversion. The converter configuration is based on a three-phase dual active bridge (TPDAB). An integrated leakage methodology is used to meet the series inductance requirements for maximum power transfer and optimize the transformer volume. Due to the transformer stray capacitances and high dv/dt of the SiC MOSFETs, high-frequency oscillations (HFO) become a significant challenge to avoid unwanted voltage spikes, current resonances, and losses. The HFO amplitudes can be minimized by considering transformer winding arrangements with lower stray capacitances leading to higher oscillation frequencies. Hence, design considerations and boundaries for the power converter and the high-frequency (HF) transformer are derived and presented. Experiments on a 150-kW TPDAB are conducted to validate the proposed design, yielding efficiencies above 98 % at 20 kW, 40 kW and 100 kW power levels, and demonstrate significant mitigation of HFO issues.

A Transformerless Intelligent Power Substation: A three-phase SST enabled by a 15-kV SiC IGBT

A Soft-Switching Solid-State Transformer Module

A Soft Start Approach of Solid-State Transformer

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

Medium Voltage Solid State Transformers Based on 15 Kv SiC MOSFET and JBS Diode.

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

270 Kva Solid State Transformer Based on 10 Kv SiC Power Devices

Auxiliary power supply for Solid State Transformers

Standalone Operation of a Single Phase Medium Voltage Solid State Transformer in Distribution Grid

15 Kv SiC MOSFET: an Enabling Technology for Medium Voltage Solid State Transformers

500Kva Hybrid Solid State Transformer (HSST): Design and Implementation of the SST

Design And Development Of Generation-I Silicon Based Solid State Transformer

13.8kV/400kW Solid State Transformer DC Fast Charger (SST-DCFC) Based on 15kV SiC AC Switch

Design and Operation of A 3.6kv High Performance Solid State Transformer Based on 13kv Sic Mosfet and Jbs Diode

A Three-Phase Isolated Building Block for High-Power Medium-Voltage Grid Applications

Design and Demonstration of a 3.6kv–120v/10kva Solid State Transformer for Smart Grid Application

Voltage and power balance control for a cascaded multilevel solid state transformer

Hardware Design of a 13.8-Kv/3-mva PV Plus Storage Solid-State Transformer (PVS-SST)

7.2Kv/100kva Solid State Transformer Based on Half Bridge LLC Resonant Converter and 15kv SiC AC Switch

The Advancement of Solid-State Transformer Technology and Its Operation and Control with Power Grids: A Review

Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems