Creep-induced Ωo Phase Precipitation and Cavity Formation in a Cast 45.5Ti-45Al-9nb-0.5b Alloy

Xu Liu,Lin Song,Andreas Stark,Daria Lazurenko,Florian Pyczak,Tiebang Zhang

DOI: https://doi.org/10.1016/j.jallcom.2021.160106

IF: 6.2

2021-01-01

Journal of Alloys and Compounds

Abstract:The precipitation behavior of omega(o) phase and creep properties of a Ti-45Al-9Nb-0.5B alloy at intermediate temperatures are investigated in this study. The prior beta(o) phase located at lamellar colony boundaries in the as-cast microstructure is entirely replaced by the omega(o) phase after creep tests. The imposed stress evidently contributes to the nucleation and growth of the omega(o) phase. The precipitation of omega(o) phase inside alpha(2) lamellae can be initiated in front of deformation twins located in adjacent gamma lamellae, which are impeded at the lamellar interface. Higher applied stress is expected to further enhance the alpha(2)->gamma phase transformation and to generate more deformation twins in the gamma lamellae. A stress exponent of n = 4.2 is determined for the present creep tests. The microstructural degradation is predominantly induced by dynamic recrystallization (DRX). The decomposition of alpha(2) lamellae via alpha(2)->omega(o) and alpha(2)->gamma transformation reduces the creep resistance. The distribution and size of omega(o) precipitates have a pronounced impact on the cavity evolution at the tertiary creep stage. The omega(o) phase formation under the synergistic effects of the thermal exposure and applied stress accelerates creep failure. (C) 2021 Elsevier B.V. All rights reserved.