Abstract:In the present work, the hydrodynamics behavior of a 3D small-scale cold flow modeling of a gas-solid tapered fluidized bed is evaluated with the Eulerian-Eulerian two-fluid modeling (TFM) approach. The sensitivity of different modeling parameters, including lift and virtual mass forces, viscous force, gas-solid drag force, granular temperature, granular viscosity, granular pressure, particle-wall specularity coefficient, particle-particle restitution coefficient, and particle-wall restitution coefficient, are systematically investigated to optimize the performance of the present numerical model. The results from different sensitivity analyses reveal that the gas-particle drag force is a more important force to resolve the correct time-averaged axial and radial solids holdup profiles of the tapered fluidized bed than the other investigated parameters. The highest accuracy possible from simulations is achieved from the Gibilaro drag model followed by the Arastoopour and EMMS/bubbling models. In contrast, all other drag models over-predict the gas-particle interaction force. The assessment of the lift and virtual mass forces, viscous force, granular temperature, granular viscosity, granular pressure, and particle-wall restitution coefficient results reveal that these parameters are less critical for the numerical simulations of the tapered fluidized bed than the gas-solid drag force. However, the assessment of particle-wall specularity coefficient and particle-particle restitution coefficient reveals that adjusting these parameters in the numerical simulations is helpful to achieve a better agreement between the experimental data and model results. For the higher gas flow rate, the current work shows that a better agreement can be achieved by tuning the parameter values in the standard sub-models than the previously published TFM studies. Meanwhile, for the lower gas flow rate, the accuracy of the present work is slightly lower than the previously published work but acceptable with the experimental measurements. The current work has an advantage over the previously published work in terms of lower computational effort by using the simplified geometry and mean particle diameter assumptions.

Comparison of Two-Fluid Model Simulations of Freely Bubbling Three-Dimensional Gas-Fluidized Beds with Magnetic Resonance Imaging Results

Comparison of CFD-DEM and TFM Simulations of Single Bubble Injection in 3D Gas-Fluidized Beds with MRI Results

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Novel Bubble–Emulsion Hydrodynamic Model for Gas–Solid Bubbling Fluidized Beds

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Novel Phase Inversion Model for Gas–solid Turbulent Fluidized Beds

A Two Fluid Modeling Study of Bubble Collapse Due to Bubble Interaction in a Fluidized Bed

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Comparison of Two-Fluid and Discrete Particle Modeling of Gas-Particle Flows in Micro Fluidized Beds

Bubble Behavior in Gas–solid Bubbling Fluidized Beds Based on EMMS Model: Comparison of 2D, Q2D, and 3D Simulations

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Validation and Sensitivity Analysis of an Eulerian-Eulerian Two-Fluid Model (TFM) for 3D Simulations of a Tapered Fluidized Bed

The effect of baffles on the hydrodynamics of a gas-solid fluidized bed studied using real-time magnetic resonance imaging

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Comparative CFD Modeling of a Bubbling Bed Using a Eulerian–Eulerian Two-Fluid Model (TFM) and a Eulerian-Lagrangian Dense Discrete Phase Model (DDPM)

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Comparative analysis on gas–solid drag models in MFIX-DEM simulations of bubbling fluidized bed

A numerical model of gas-fluidized beds