Abstract:SrTiO3 based perovskites show great potential as n-type thermoelectric (TE) materials, but maintaining the good electrical properties while reducing lattice thermal conductivity is challenging. Entropy engineering could be a promising way to synergistically regulate the electrical and thermal transport in order to improve the thermoelectric performance of SrTiO3 based ceramics. In this work, the single cubic structured Sr0.9-xBaxLa0.1Ti0.9Nb0.1O3-δ (x = 0.1, 0.2, 0.3, 0.4, 0.5) is designed by the calculations of Goldschmidt's tolerance factor, ionic radius difference and detailed thermodynamic process and successfully synthesized by solid state reaction. The single cubic structure and homogenous element distribution are confirmed by Rietveld refinement of XRD and EDS mapping. Oxygen deficiency and high crystal symmetry lead to good electrical properties derived by the effect of configurational entropy, which results to high power factor, PF = 602.1μW‧m-1K-2. The enhanced point defect and local disorder scattering is the dominant factor to significantly reduce the lattice thermal conductivity, especially for large mass fluctuation driven by increasing of point defects, which is a typical result of entropy effects. As the result, the lowest lattice thermal conductivity of 2.93 W‧m-1K-1 at 923 K is achieved for the Sr0.4Ba0.5La0.1Ti0.9Nb0.1O3-δ sample. By the synergistic optimization of entropy engineering, a highest zT value, 0.15, is achieved for x = 0.2 sample at 973 K. The estimated corresponding optimized configurational entropy ranges 9-10 J mol-1K-1. Besides, Vickers hardness of 7-11GPa is also measured for all samples. Henceforth, entropy engineering is a promising method for optimizing thermoelectric and mechanical performance for SrTiO3 based ceramics, which opens a new way to design thermoelectric oxide materials with good electrical properties and low lattice thermal conductivity.

Interface-enhanced thermoelectric output power in CrN/SrTiO<sub>3-<i>x</i></sub> heterostructure

Interface-enhanced thermoelectric output power in CrN/SrTiO3− heterostructure

Synergetic Enhancement of Thermoelectric Performance in a Bi0.5Sb1.5Te3/SrTiO3 Heterostructure

Enormous thermoelectric power factor of ZrTe2/SrTiO3 heterostructure

Record High Thermoelectric Performance in Bulk SrTiO3 Via Nano-Scale Modulation Doping

Excellent thermoelectric performance of ZrTe2 thin films and device

High thermoelectric performance of ZrTe2/SrTiO3 heterostructure

First-principles calculations and high thermoelectric performance of La–Nb doped SrTiO3 ceramics

High thermoelectric performance of niobium-doped strontium titanate bulk material affected by all-scale grain boundary and inclusions

High thermoelectric properties of P-SiGe/Sr0.9La0.1Ti0.9-xZrxNb0.1O3 composite

Relationship Between the Thermoelectric Properties and Infrared Emissivity of Nb-Doped TiO2

Enhanced thermoelectric performance in n-type SrTiO3/SiGe composite.

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

Ultrahigh Thermoelectric Performance in SrNb0.2Ti0.8O3 Oxide Films at a Submicrometer-Scale Thickness

Synergetic enhancement of thermoelectric performance in a Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub>/SrTiO<sub>3</sub> heterostructure

Tuning SnSe/SnS Hetero-Interfaces to Enhance Thermoelectric Performance

Optimized Hetero-Interfaces by Tuning 2d Sns2 Thickness in Bi2te2.7se0.3/Sns2 Nanocomposites to Enhance Thermoelectric Performance

Stable cubic crystal structure and optimized thermoelectric performance of SrTiO3 based ceramics driven by entropy engineering

2D Bi2Te3/Si heterostructure with high thermoelectric power factor enabled by interface regulated carrier injection

Tuning the Thermoelectric Properties of Transition Metal Oxide Thin Films and Superlattices on the Quantum Scale

High Thermoelectric Performance of All-Oxide Heterostructures with Carrier Double-Barrier Filtering Effect