Abstract:For the dc-link busbar in a high-capacity converter, the large-size laminated busbar is not adoptable due to the machining difficulty and limitation in current capability. In contrast, the regular nonlaminated busbar solution guarantees the required power capacity with a lower cost and easier installation. The main challenges exist in the large stray inductance and corresponding resonance phenomenon. Related analysis and accurate synthesis theory have not been reported. In this article, a matrix analysis method is proposed for the formed multiport and high-order network in a dc-link busbar. First, the multiport interaction and coupling are mathematically derived based on the subnetwork admittance matrix combination. The multipeak resonance phenomena are explained in detail. Meanwhile, it is manifested that proposed matrix method can be applied with the positive and negative sequence current analysis. Then accurate resonate currents can be obtained under the nonsinusoidal busbar current consideration. Finally, a resonance current gain (RCG) value is formed for the quantitative capacitor current evaluation and busbar design guidance. Proposed design and evaluation method is verified in a 315-kW converter system. More than 49% resonant current in the capacitor gets depressed by the enhancement. Its effect is close to the laminated busbar solution.

DC-Link Busbar Network Design and Evaluation Method for the Large-Capacity Power Electronic Converter

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Study And Design Of Noninductive Bus Bar For High Power Switching Converter

Optimized Design of Laminated Busbar for Large-Capacity Back-to-Back Converters

Current Sharing Analysis and Evaluation of Parallel DC-Link Capacitors in Vehicle Motor Drive

Study On Planar Busbar Regarding Stray Inductance Minimization And Oscillation Suppression For High Power Converter

Unit Partition Method for the Resonance Research in the Dc-link Busbar of Back-to-back Converter

Methodology of Low Inductance Busbar Design for Three-Level Converters

Busbar Optimization Design for High Power Converters

Study of Interleave DC/DC Converter in Energy Feedback Electronic Power Load

Engineering Design for Structure and Bus Bar of 1.2MV·A Hybrid Clamped Five-Level Converter Module

The large-size low-stray-parameter planar bus bar for high power IGBT-based inverters

Laminated busbar design and stray parameter analysis of three-level converter based on HVIGBT series connection

Configuration of Low Inductive Laminated Bus Bar in 750 Kva NPC Three-level Universal Converter Module of High Power Density

Study on DC Busbar Structure Considering Stray Inductance for the Back-to-back IGBT-based Converter

Improvement for Planar Bus Bars of High Power Inverters Based on Segmented Evaluation of Stray Parameters

Design of high power density DC bus converter based on llc resonant converter with synchronous rectifier

High Order Distribute Circuit Model of Laminated Busbars and Its Order Reduction Techniques for Simulating Fast Turn-on and Turn-off Transients

Design, Simulation and Analysis of the Low Stray Inductance Bus Bar for Voltage Source Inverters

Low stray inductance bus bar design and construction for good EMC performance in power electronic circuits

Advantages for Embedding DC-link Decoupling Capacitance in High Capacity Power Electronic Converters