Abstract:In recent years, the performance research of perovskite materials is not only concentrated in the field of solar cells or optics, but the field of gas sensing has gradually entered the public view. However, the detection of nitric oxide (NO) by lead-free halide perovskites has not yet been reported. Herein, we use Cs2PtI6 to realize the first example of a halide perovskite applied to NO sensing. Due to favoring Pt–N binding, the material has some excellent properties such as a NO detection limit as low as 100 parts-per-billion (ppb), ultrahigh selectivity to NO, and can work at room temperature for more than 2 months. In situ sum frequency generation (SFG) spectra and crystal orbital Hamilton population (COHP) analysis reveal that the strong bonding interaction between Pt 5s and N 2s ensure the high adsorption energy, and Pt 5d electron back donation to N 2px, N 2pz antibonding causes the conductive change of the sensors. In addition, its flexible wearable technology shows the application potential of the device and promotes the further development of perovskite materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssensors.1c01791.Comparison of performance for some recent reported metal oxide semiconductors nitric oxide sensors of different types (Table S1); EDX mapping images of a Cs2PtI6 octahedron (Figure S1); low-magnification SEM figure of the electrodes where the material is deposited on them (Figure S2); SAED pattern and thermogravimetric analysis curve of Cs2PtI6 octahedrons (Figure S3); photograph of the sensor device and the thickness of the sensor film (Figure S4); gas sensor test system (Figure S5); temporal responses with increasing NO concentrations in the range of 100 ppb–10 ppm (Figure S6); influence of different temperatures on curve recovery (Figure S7); SEM images with EDS stoichiometry and the XRD pattern of pristine Cs2PtI6 and treated NO (Figure S8); repeatability of the sensor based on Cs2PtI6 toward 500 ppb, 1 ppm, 4 ppm, and 10 ppm NO (Figure S9); effect of environmental temperature to the sensor based on Cs2PtI6 with 10 ppm NO (Figure S10); effect of different relative humidities to the sensor based on Cs2PtI6 with 1, 2, 4, and 8 ppm NO (Figure S11); effect of light intensity to the sensor based on Cs2PtI6 with 400 ppb, 600 ppb, 800 ppb, and 1 ppm NO (Figure S12); the charge distribution and the O–Pt bond length of NO adsorbed on the surface of Cs2PtI6 (Figure S13); flexibility and stability of the Cs2PtI6 sensor (Figure S14); flexibility when the wrist is naturally bent downward to different degrees (Figure S15); flexibility when the wrist is naturally bent upward with different degrees (Figure S16); and schematic illustration of the preparation of the NO sensor device (Figure S17) (PDF)This article has not yet been cited by other publications.

Lead-Free CsCu2I3 Perovskite Nanostructured Networks Gas Sensor for Selective Detection of Trace Nitrogen Dioxide at Room Temperature

Lead-Free CsCu 2 I 3 Perovskite Nanostructured Networks Gas Sensor for Selective Detection of Trace Nitrogen Dioxide at Room Temperature

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Lead-Free Halide Cs 2 PtI 6 Perovskite Favoring Pt–N Bonding for Trace NO Detection

Engineering SnO2 Nanorods/ethylenediamine-Modified Graphene Heterojunctions with Selective Adsorption and Electronic Structure Modulation for Ultrasensitive Room-Temperature NO2 Detection.

High‐Performance Optoelectronic Gas Sensing Based on All‐Inorganic Mixed‐Halide Perovskite Nanocrystals with Halide Engineering

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

Sensitive NO Detection by Lead-Free Halide Cs2TeI6 Perovskite with Te-N Bonding

N-Doped Carbon Dots/Sns2 Heterostructures for Ultra-Fast and Sub-Ppb-Level Detection of No2 in Multiple Environments

Lead-Free Halide Cs2PtI6 Perovskite Favoring Pt-N Bonding for Trace NO Detection.

Novel Organometal Halide Perovskites for Room Temperature NO2 Gas Sensor

Cu2O/CuO Hollow Nanospheres/Carbon Composites for NO2 Detection at Room Temperature

Cu-MOF-Derived C-Doped CuO/Cu2O Hollow Nano-Octahedrons for Room-Temperature NO2 Sensing at the Ppb Level

PbSe Quantum Dots-Based Chemiresistors for Room-Temperature NO2 Detection

Mesoporous and Encapsulated In2O3/Ti3C2Tx Schottky Heterojunctions for Rapid and Ppb-Level NO2 Detection at Room Temperature.

Gas sensors based on SnS 2 /In 2 O 3 for high performance NO 2 detection at room temperature

Covalent Organic Framework‐Enhanced Metal Halide Perovskites for Selective and Sensitive Gas Sensing

Designing One-Dimensional Hierarchical Cu@Cu2O/CuO Core-Shell Heterostructure for Highly Sensitive Detection of NO2 at Room Temperature

Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO<sub>2</sub> Gas Sensor Based on Hollow SnO<sub>2</sub>/ZnO Nanofibers

High-Performance Ppb Level NO2 Gas Sensor Based on Colloidal SnO2 Quantum Wires/Ti3C2Tx MXene Composite