Abstract:With the growing demand for lightweight and high-performance components applied in extreme aerospace environments, there is a prospective interest in producing the integrated multi-material components consisting of titanium alloy and aluminum alloy. Laser powder bed fusion (LPBF), as a laser powder bed based additive manufacturing process with a high production flexibility, shows a promising potential in creating multi-material components. However, due to the possibility of the generation of various intermetallic compounds (IMCs) at the interface, it has been a significant challenge to fabricate reliable Ti/Al alloy multi-material components without any crack formation by LPBF. In this study, the Ti6Al4V/AlMgScZr multi-material parts were fabricated by LPBF and the effects of building parameters of AlMgScZr on the residual stress and crack control of Ti6Al4V/AlMgScZr multi-material parts were investigated. The evolution mechanisms of IMC phases at the interface under laser interaction were further revealed. Due to the change of elemental compositions and difference in Gibbs free energies of IMCs, a gradient ordered transition zone with a width of about 450 μm consisting of Al 3 Ti, TiAl, and Ti 3 Al was formed from AlMgScZr to Ti6Al4V. A finite element model was established to explain the effects of process parameters on residual stress evolution, cracking formation and its control. As the scan speed increased from 500 to 1100 mm/s and the attendant building height of AlMgScZr increased to 60 layers, the residual stress of laser processed Ti6Al4V decreased from 439 to 364 MPa, but the residual stress of AlMgScZr increased from 195 to 303 MPa. As the applied scan speed was enhanced to process AlMgScZr, the element diffusion was mitigated, thereby reducing the formation of IMCs and stress concentration. This study shows the possibility of in-situ control of IMCs and residual stress by process optimization during LPBF preparation of titanium alloy/aluminum multi-material parts without crack formation.

Spatiotemporal Variations of Residual Stresses During Multi-Track and Multi-Layer Deposition for Laser Powder Bed Fusion of Ti-6Al-4V

Residual stress of typical parts in laser powder bed fusion

The influence of building parameters on residual stress, interfacial structure, and cracking control of laser powder bed fusion processed Ti6Al4V/AlMgScZr multi-material parts

In-situ control of residual stress and its distribution in a titanium alloy additively manufactured by laser powder bed fusion

Effects of Build Direction and Heat Treatment on the Defect Characterization and Fatigue Properties of Laser Powder Bed Fusion Ti6Al4V

A Framework for Simulating the Path-level Residual Stress in the Laser Powder Bed Fusion Process

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Numerical Analysis of the Effects of Reinforcing Particles on the Residual Stress of TiB2/Al-Si Composites Fabricated by Laser Powder Bed Fusion

Effect of laser process parameters on thermal behavior and residual stress of high-strength aluminum alloy processed by laser powder bed fusion

Residual stress reduction in Ti-6Al-4V parts fabricated by laser-foil-printing process

Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition

Residual stress prediction in a powder bed fusion manufactured Ti6Al4V hip stem

In-situ investigation into the deformation behavior of Ti-6Al-4V processed by laser powder bed fusion

Deformation and control method of thin-walled part during laser powder bed fusion of Ti–6Al–4V alloy

In situ measurements and simulation of residual stresses and deformations in additively manufactured thin plates

Study of residual stresses and distortions from the Ti6Al4V based thin-walled geometries built using LPBF process

Effect of Powder Layer Thickness on Residual Stress in Laser Powder Bed Fusion of IN718

Numerical Investigation into the Effect of Different Parameters on the Geometrical Precision in the Laser-Based Powder Bed Fusion Process Chain

Overlap ratio and scanning strategy effects on laser powder bed fusion Ti6Al4V: numerical thermal modeling and experiments

The effect of rescanning strategy on residual stress and deformation of laser-based powder bed fusion of 316L stainless steel thin-walled parts

Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling