Abstract:Magnesium aluminate spinel (MgAl2O4) ceramics are high-performance and carbon-free materials widely used in both military and civilian fields. However, it is usually challenging to densify during the solid-state sintering process. The excellent properties of some rare earth oxides have been proved to promote the densification of MgAl2O4 spinel ceramics. But the mechanism of promoting sintering is not clear. In the present work, MgAl2O4 spinel ceramics have been successfully fabricated by co-doping CeO2 and La2O3 via a single-stage solid-state reaction sintering. The effects of addition amounts of CeO2 and La2O3 on phase compositions, microstructures, sintering characteristics, cold compressive strength, and thermal shock resistance of as-prepared MgAl2O4 spinel ceramics were systematically investigated. The results show that by co-doping CeO2 and La2O3 can increase the defect concentration due to the lattice distortion. This could promote the movement of Al3+ and Mg2+ at high temperature, which is beneficial to the formation of more secondary MgAl2O4 spinel. t-ZrO2 with more Ce4+ filling between spinel grains could prevent the growth of grains and promote the densification, besides the new-formed LaAlO3 that was mainly distributed along the grain boundary of the MgAl2O4 phase, both of which were favorable for the formation of dense microstructure of MgAl2O4 spinel materials. At the same time, the formation of more secondary MgAl2O4 spinel and sintering densification also improve the mechanical properties of spinel ceramics. La3+ will segregate to the spinel grain boundary, preventing grain boundary movement and absorbing the main crack's fracture energy. With 3 wt% CeO2 and 3 wt% La2O3 co-doping, the bulk density of the sample increased from 3.02 g∙cm−3 to 3.55 g∙cm−3; the apparent porosity decreased from 12.21% to 9.97%; the cold compressive strength increased from 172.88 MPa to 189.54 MPa; and the residual strength retention ratio after thermal shock increased from 84.92% to 89.15%.

Preparation of Zr4+ Doped Calcium Hexaaluminate with Improved Slag Penetration Resistance

Preparation of Zr 4+ doped calcium hexaaluminate with improved slag penetration resistance

Synthesis of CA6/AlON Composite with Enhanced Slag Resistance

Effect of incorporation of nitrogen on calcium hexaaluminate

Effect of CaO doping on densification and micr‐ostructure control of highly transparent La0.4Gd1.6Zr2O7 ceramics

Effect of La2O3 on Structure and Properties of Calcium-Hexaluminate Prepared by Reaction Sintering

Preparation of calcium hexaluminate porous ceramics by gel-casting method with polymethyl methacrylate as pore-forming agent

Sintering mechanism and properties of MgAl2O4–CaAl12O19 composites with ZnO addition

Effect of CeO2 on properties of calcium-hexaluminate material

Effect of Calcining and Al Doping on Structure and Conductivity of Li7La3Zr2O12

Improvement of Structural and Optical Properties of ZnAl2O4:Cr3+ Ceramics with Surface Modification by Using Various Concentrations of Zinc Acetate

Microstructure and mechanical properties of CaAl12O19 reinforced Al2O3-Cr2O3 composites

Effect of Ca Concentration on Microstructure and Mechanical Properties of As-Cast and As-Extruded Quasicrystal-Strengthened Mg-7.2Zn-2.4Gd Alloy

Mechanical properties and calcium–magnesium–alumino–silicate corrosion behaviour of Ce/Gd co-doped SrZrO3 ceramics

Preparation of CaZr_4(PO_4)_6 powder by direct co-precipitation method

Synthesis and Characterization of Neodymium Zirconate Nanocrystals Doped with Aluminium Ions by A Salt-Assistant Combustion Method

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

Modification of LaB6 with ZrO2-Al2O3-TiO2 for Improvement of Density and Mechanical and Electrical Properties

Structural, morphological, spectroscopic, and electrochemical properties of Cr doped ZnAl2O4

Microstructure and mechanical properties of dense ZTA ceramics with high Cr2O3 solution

Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3