Synthesis and electrochemical properties of LiFePO4 cathode material by ionic thermal method using eutectic mixture of tetramethyl ammonium chloride–urea

Si-Nan Li,Shao-Hua Luo,Liu Yang,Qing Wang,Ya-Hui Zhang,Xin Liu

DOI: https://doi.org/10.1007/s12598-021-01783-4

IF: 6.318

2021-06-30

Rare Metals

Abstract:In this study, the LiFePO4 cathode was synthesized by the ionic thermal method using the deep eutectic mixture of tetramethyl ammonium chloride and urea. The synthetic conditions were systematically investigated by orthogonal experiments, which indicate that the optimal reaction time, reaction temperature, molar ratio of Li to DES and rotate speed are 96 h, 220 °C, 1:14 and 20 r·min −1, respectively. X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) were characterized to investigate the crystalline structure and morphology of the obtained materials, indicating well-crystallized LiFePO4 with olivine structure. And the physical properties of LiFePO4 were explored through Fourier transform infrared spectroscopy (FTIR), 57Fe Mössbauer absorption spectra and Raman spectra. An initial discharge capacity can reach 151 mAh·g−1 at 0.1C rate for LiFePO4 following by calcining at 600 °C under the optimal conditions, and it retains 125.1 mAh·g−1 after 100 cycles. These results demonstrated that the addition of ionic liquids can improve the rate performance, cycle performance and ion diffusion rate of LiFePO4.Graphical abstract

materials science, multidisciplinary,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The paper primarily focuses on addressing the issues encountered by the cathode material LiFePO4 (lithium iron phosphate) in practical applications of lithium-ion batteries, particularly its low electronic conductivity and working voltage. The authors synthesized LiFePO4 cathode materials with improved performance using an ionothermal method and deep eutectic solvents (DESs), a mixture of choline chloride and urea. Specifically, the paper optimized the reaction conditions through orthogonal experiments, including reaction time, temperature, the molar ratio of Li to DES, and stirring speed, to find the best synthesis parameters. The study found that LiFePO4 synthesized under optimal conditions exhibited a higher initial discharge capacity (151mAh/g) and good cycle stability (maintaining 125.1mAh/g after 100 cycles). Additionally, the paper explored the impact of the calcination process on material performance, indicating that calcination at 600°C could further improve the material's electronic conductivity, thereby enhancing electrochemical performance. In summary, the paper aims to improve the performance of LiFePO4 as a cathode material for lithium-ion batteries by improving the synthesis method, to meet the demands of sustainable energy, modern electronic devices, and energy storage systems.