Abstract:Multilayer flame-retardant coatings, consisting of opposite-charged polyelectrolyte polyethyleneimine (PEI), ammonium polyphosphate (APP) and polyacrylic acid (PAA), were constructed on the surface of soft and porous ramie fabrics by layer-by-layer (LBL) assembly technique. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and field-emission scanning electron microscopy with an energy-dispersive X-ray (SEM-EDX) analysis confirmed that PAA was successfully introduced into the bi-component PEI/APP multilayer flame-retardant coatings. The P/C (phosphorus/carbon) ratio was clearly increased on the surface of the ramie fabric with the increase of the number of layers. The effect of PAA as a supplementary acid source on the flame retardancy of the treated ramie fabrics was studied by thermogravimetic analysis (TGA), microscale combustion calorimetry (MCC) and vertical flame testing (VFT). The results of the thermal properties showed that the char residue of the coated fabrics at high temperature during thermogravimetric analysis was significantly enhanced as compared with the untreated sample. Furthermore, the microscale combustion calorimetry revealed a reduction for both peak heat release rate (PHRR) and total heat release (THR). The surface morphologies of all the untreated and treated ramie fabrics after VFT demonstrated that the PEI/APP/PAA coated specimen preserved the integrity of the original texture of the ramie fabrics, and a dense and continuous expansion carbon layer was formed on the surface of the ramie fabric. The carbon layer effectively prevented oxygen and heat from penetrating into the substrate, thereby giving the ramie fabric excellent self-extinguishing properties. EDX spectra also revealed that the ratio of P/O (phosphorus/oxygen) and P/C of the char of the treated ramie fabric became high after combustion test. Compared to the bi-component (PEI/APP)n sample, the introduction of the third component PAA seemed to work at low assembly cycles by increasing the charge density of PEI, thus to improve the add-on of the FR coating on the fabric, but the concentration of PAA had little influence on the assembly process. However, the same charges may repel each other from the confusion of APP and PAA with high layers, causing the FR effect not that favorable.

Dipodal silane‐treated ramie woven matt reinforced polylactic acid biocomposites for improved mechanical and thermal properties

Flame Retardancy of Ramie Fabrics Treated by Layer-by-layer Assembly Technique of Tri-component PEI/PAA/APP

Preparation and properties of intumescent flame retardant multilayer coatings treated ramie fabric/benzoxazine resin laminates

Influence of Hot Press Molding Parameters on the Tensile Strength of Bamboo Fiber/PLA Composites

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

Flame-retardant Coating by Alternate Assembly of Poly(vinylphosphonic Acid) and Polyethylenimine for Ramie Fabrics

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric

Effects of PLA-Type and Reinforcement Content on the Mechanical Behavior of Additively Manufactured Continuous Ramie Fiber-Filled Biocomposites

Optimization of Alkali Treatment Conditions of Ramie Fabrics Using Box–Behnken Method

Hot Compaction and Mechanical Properties of Ramie Fabric/Epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding

Mechanical, viscoelastic, and biodegradability characteristics of ramie fibre‐reinforced acrylonitrile butadiene styrene composites

Study on the mechanical properties of ramie fiber/polypropylene composites prepared by hot pressing after the carding machine mixing

Effect of alkali and silane treatments on properties of green composites based on ramie fibers and cellulose acetate resin

Influence of washing with sodium lauryl sulphate (SLS) surfactant on different properties of ramie fibres

Analysis of Tensile Strength and Water Absorption Properties of Glass-Ramie Hybrid Laminated Composite

Influence of continuous ramie yarn content on printability and mechanical properties of in situ impregnation 3D printed biocomposites

Influence of surface treatments and addition of a reactive agent on the properties of PLA/flax and PLA/bamboo composites

THE IMPROVEMENT OF RAMIE FIBER PROPERTIES AS COMPOSITE MATERIALS USING ALKALIZATION TREATMENT: NaOH CONCENTRATION

Fabrication and property characterization of biocomposite based on polyamide 11 and AP1 green ramie fiber modified with epoxy

Mechanical and vibrational study of raw and surface‐treated ramie fiber hybridized carbon fiber epoxy composites

Comparative Study of Mechanical Properties and Thermal Stability on Banyan/Ramie Fiber-Reinforced Hybrid Polymer Composite