Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Direct Numerical Simulation Of Flow And Heat Transfer In Bidisperse Gas-Solid Systems

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Modeling and numerical simulation of gas-solid jet in the transitional-rarefied regime

A Three-Dimensional Fictitious Domain Method for Direct Numerical Simulations of Particle-Laden Flows with Heat Transfer

Simulation of gas flow and heat transfer in micro Poiseuille flow

Novel Drag and Nusselt Number Models Based on Direct Numerical Simulations of a Bidisperse Gas–solid System

Fully Resolved Numerical Simulation of Interphase Heat Transfer in Gas–solid Turbulent Flow

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Effect of heterogeneity on interphase heat transfer for gas–solid flow: A particle-resolved direct numerical simulation

Numerical Simulation of the Melting of Solid Particles in Thermal Convection with a Modified Immersed Boundary Method

Simulation of Flow and Heat Transfer in Micro Couette Flow

Hydrodynamics of polydisperse gas-solid flows: Kinetic theory and multifluid simulation

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Simulations for Gas Flows in Microgeometries Using the Direct Simulation Monte Carlo Method

Numerical Simulation on Mixed Convection in a Porous Medium Heated by a Vertical Cylinder

Direct numerical simulation of three-dimensional particle-laden thermal convection using the Lattice Boltzmann Method

Conductive and Radiative Heat Transfer Mechanisms Inform Nusselt Number Dependence on Solid Volume Fraction for Granular Flows

Research on Numerical Simulation of a Sort of Typical Flow System

Numerical Investigation of Particle Dynamic Behaviours in Geophysical Flows Considering Solid-Fluid Interaction

Numerical simulation of gas–liquid–solid three-phase flow using particle methods