Abstract:Polymers of intrinsic microporosity (PIMs) are a promising membrane material for gas separation, because of their high free volume and micro-cavity size distribution. This is countered by PIMs-based membranes being highly susceptible to physical aging, which dramatically reduces their permselectivity over extended periods of time. Supercritical carbon dioxide is known to plasticize and partially solubilise polymers, altering the underlying membrane morphology, and hence impacting the gas separation properties. This investigation reports on the change in PIM-1 membranes after being exposed to supercritical CO2 for two- and eight-hour intervals, followed by two depressurization protocols, a rapid depressurization and a slow depressurization. The exposure times enables the impact contact time with supercritical CO2 has on the membrane morphology to be investigated, as well as the subsequent depressurization event. The density of the post supercritical CO2 exposed membranes, irrespective of exposure time and depressurization, were greater than the untreated membrane. This indicated that supercritical CO2 had solubilised the polymer chain, enabling PIM-1 to rearrange and contract the free volume micro-cavities present. As a consequence, the permeabilities of He, CH4, O2 and CO2 were all reduced for the supercritical CO2-treated membranes compared to the original membrane, while N2 permeability remained unchanged. Importantly, the physical aging properties of the supercritical CO2-treated membranes altered, with only minor reductions in N2, CH4 and O2 permeabilities observed over extended periods of time. In contrast, He and CO2 permeabilities experienced similar physical aging in the supercritical treated membranes to that of the original membrane. This was interpreted as the supercritical CO2 treatment enabling micro-cavity contraction to favour the smaller CO2 molecule, due to size exclusion of the larger N2, CH4 and O2 molecules. Therefore, physical aging of the treated membranes only had minor impact on N2, CH4 and O2 permeability; while the smaller He and CO2 gases experience greater permeability loss. This result implies that supercritical CO2 exposure has potential to limit physical aging performance loss in PIM-1 based membranes for O2/N2 separation.

Enhancing Polyimide-Based Mixed Matrix Membranes Performance for CO2 Separation Containing PAF-1 and P-Dcx

Amidoxime Modified UiO-66@PIM-1 Mixed-Matrix Membranes to Enhance CO2 Separation and Anti-Aging Performance

Metal‐Coordinated, Dual‐Crosslinked PIM Polymer Membranes for Upgraded CO2 Separation: Aging and Plasticization Resistance

Mitigated Aging in a Defective Metal–Organic Framework Pillared Polymer of an Intrinsic Porosity Hybrid Membrane for Efficient Gas Separation

Molecular Mobility and Gas Transport Properties of Mixed Matrix Membranes Based on PIM-1 and a Phosphinine Containing Covalent Organic Framework

Simultaneously enhanced gas separation and anti-aging performance of intrinsic microporous polyimide by dibromo substitution

Mixed matrix composite membranes with MOF-protruding structure for efficient CO 2 separation

PIM-based mixed-matrix membranes containing MOF-801/ionic liquid nanocomposites for enhanced CO2 separation performance

High Gas Permeability in Aged Superglassy Membranes with Nanosized UiO-66-NH2 /cPIM-1 Network Fillers

Mixed Matrix Membranes for Efficient CO2 Separation Using an Engineered UiO-66 MOF in a Pebax Polymer

Effect of Temperature-Induced Aging on the Gas Permeation Behavior of Thin Film Composite Membranes of PIM-1 and Carboxylated PIM-1

Incorporating KAUST-7 into PIM-1 Towards Mixed Matrix Membranes with Long-Term Stable CO2/CH4 Separation Performance

Mixed matrix membranes with intrinsic microporous/UiO-66 post-synthesis modifications with no defects for efficient CO 2 /N 2 separation

Double-decker-shaped phenyl-substituted silsesquioxane (DDSQ)-based nanocomposite polyimide membranes with tunable gas permeability and good aging resistance

Metal-organic framework MOF-801/PIM-1 mixed-matrix membranes for enhanced CO2/N2 separation performance

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.

“All Polyimide” Mixed Matrix Membranes for High Performance Gas Separation

Improving the Selectivity of ZIF-8/Polysulfone-Mixed Matrix Membranes by Polydopamine Modification for H2/CO2 Separation

Polymer of Intrinsic Microporosity (PIM-1) Membranes Treated with Supercritical CO2

Developing Mixed Matrix Membranes with Good CO2 Separation Performance Based on PEG-Modified UiO-66 MOF and 6FDA-Durene Polyimide

Cross-Linked Mixed-Matrix Membranes Using Functionalized UiO-66-NH2 into PEG/PPG-PDMS-Based Rubbery Polymer for Efficient CO2 Separation