Abstract:The vector control of the permanent magnet synchronous motor (PMSM) is affected by cross-coupling, output delay, parameter mismatch, and other factors; thus, resulting in its poor steady-state and insufficient dynamic performance. To address these problems, the design proposed in this study adopts a model predictive current control strategy. In the traditional model predictive control, the absolute value of the difference between the predicted output current of the inverter and the reference current is used as the cost function instead of the minimum value of the valence function, i.e., the optimal solution of the system, and the best switching state is outputted. The design proposed in this study adopts the dual-vector model to predict the current control. Firstly, the reference voltage vector was predicted on basis of the deadbeat idea, which reduced the calculation burden of processor. Next, in order to further improve the stability of the system, a two-vectors duty cycle calculation method was introduced. Then, simplifies the selection range of the two voltage vectors. While ensuring the accuracy of the voltage vector, the control is reduced. Reduce the amount of calculation in the system, thereby improving its robustness. Finally, based on the principle of current vector tracking error minimization, the duration of the selected voltage vector was determined. Last but not the least, the control strategy is applied to the MTPA control to increase the operating efficiency of the control motor. The improved control strategy can effectively reduce the torque ripple and improve the dynamic and steady-state performance of the system. Simulation results verify the feasibility and effectiveness of the proposed control algorithm.

Improved Multiple Vector Model Predictive Torque Control of Permanent Magnet Synchronous Motor for Reducing Torque Ripple

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Model Predictive Torque Control for Dual Three-Phase PMSM based on Novel Virtual Voltage Vector

An Improved Model Predictive Torque Control for Switched Reluctance Motors with Candidate Voltage Vectors Optimization

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Three-Vector-Based Model Predictive Torque Control for a Permanent Magnet Synchronous Motor of EVs

Two-Vector-Based Model Predictive Torque Control Without Weighting Factors for Induction Motor Drives

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

An Improved Model Predictive Direct Torque Control Strategy for Reducing Harmonic Currents and Torque Ripples of Five-Phase Permanent Magnet Synchronous Motors.

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

A Modified Deadbeat Predictive Flux Control for Reducing Torque Ripple at Low Modulation Ratio

Model predictive flux control for permanent magnet synchronous motor

Analysis of Torque Ripples of Vector-Controlled Permanent Magnet Synchronous Motors

Torque ripple analysis and reduction of permanent magnet synchronous motor

An Improved Model Predictive Torque Control Strategy of a Shearer Semi-direct Permanent Magnet Synchronous Motor Based on Duty Cycle

New model based predictive torque control algorithm in combination with duty ratio modulation strategy for flux-switching permanent magnet synchronous machines

Ripple torque lessening in space vector pulse width modulation based direct torque control of permanent magnet synchronous motor drive

MTPA control of permanent magnet synchronous motor based on dual-vector model predictive control