Abstract:Direct liquid fuel cells (DLFCs) are promising power sources for future portable, wearable or implantable electronic devices owing to their high energy density and low emissions. Large efforts have been given for the development of DLFCs since 1990s, however the wide spread commercialization of DLFCs is still limited by the high cost coming from the expensive noble metal catalysts and proton exchange membranes. Furthermore, the safety risks related to organic fuels (methanol, ethanol and formic acid), such as toxicity and flammability, bring up tremendous consideration in fuel cell design, fuel distribution and transportation [1]. Finally, the emission of CO2 is inevitable by using organic fuels, which escalates to Green House Effect. In this work, we proposed a new category of inorganic fuels for DLFCs. Hypophosphite is a type of food additive, therefore no safety hazards at all, and is also a strong reductant whose electrochemical oxidation reactivity is strongly correlated to metallic palladium [2]. Moreover, the inorganic fuels could realize “Zero Emission” after “Burning”. From thermodynamic calculations, the theoretical cell voltage and volumetric energy density at 1M are 2.05 V and 188 Wh/L at standard conditions, which are comparable and even better than the data of DMFCs (Direct Methanol Fuel Cells). The unique electrochemical oxidation behavior of hypophosphites on Pd catalyst brings advantages in simplifying fuel cell structure and broadening our selections of cathodic catalysts for ORR (Oxygen Reduction Reaction). Herein, we report the investigation of catalyst design and cell design of a novel membrane-free Direct Hypophosphite Fuel Cell (DHPFC), which showed an open circuit voltage of 1.0 V and a maximum power density of 32 mW cm-2 under air flow at 25 oC. The oxidation mechanism of hypophosphites on Pd was also studied in this work. This work is financially sponsored by Solvay and “Shanghai Rising-Star Program” (16QB1404600). Reference: [1] G. L. Soloveichik, Beilstein J. Nanotechnol. 2014, 5, 1399-1418. [2] N. Fujiwara, Z. Siroma, T. Ioroi, K. Yasuda, J. Power Sources 2007, 164, 457-463.

Investigation on a Novel Direct Liquid Fuel Cell Feeding on Oxalyl Dihydrazide

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

Research Progress on the Direct Dimethyl Ether Fuel Cell

Atomically dispersed catalysts for small molecule electrooxidation in direct liquid fuel cells

Direct Hydrazine Borane Fuel Cell Using Non-noble Carbon Supported Polypyrrole Cobalt Hydroxide as Anode Catalyst

Unlocking the potential of Pt-based and metal oxides catalysts in liquid fuel cells technologies: Performance and challenges

Investigation of a Novel MEA for Direct Dimethyl Ether Fuel Cell

Progress and challenges: Review for direct liquid fuel cell

Activating Triple-Phase Boundary Via Building Oxygen-Electrolyte Interfaces to Construct High-Performance Ph-Disparate Direct Liquid Fuel Cells

Direct oxidation alkaline fuel cells: from materials to systems

Insight into interface behaviors to building a phase-boundary-matched Na-ion direct liquid fuel cell

Direct Liquid Fuel Cells by Using Hypophosphites

Reaction-separation anode for enhancement of fuel diffusion against CO2 evolution to improve performance of direct liquid-feed fuel cells

Overall Design of a Gradient‐Ordered Membrane Electrode Assembly for Direct Liquid Fuel Cells

A Direct Borohydride Fuel Cell with a Polymer Fiber Membrane and Non-Noble Metal Catalysts.

Hydroxide Self-Feeding High-Temperature Alkaline Direct Formate Fuel Cells

An alkaline direct methanol fuel cell with a polymer fiber membrane and MnO2-catalyzed cathode

A Direct Liquid Fuel Cell with High Power Density Using Reduced Phosphotungstic Acid as Redox Fuel

In-situ Bubble Emission and Transport Mechanisms in Janus Electrode within Direct Liquid Fuel Cells

Dual Oxidation by Hybrid Electrode: Efficiency Enhancement of Direct Hypophosphite Fuel Cell