Investigation of the Acousto‐optical Properties of Ge–As–Te–(Se) Chalcogenide Glasses at 10.6 Μm Wavelength

Zhenfei Cao,Shixun Dai,Zijun Liu,Chengcheng Liu,Shengjie Ding,Changgui Lin

DOI: https://doi.org/10.1111/jace.17767

IF: 4.186

2021-01-01

Journal of the American Ceramic Society

Abstract:The acousto-optic parameters of Ge10As90-xTex (x = 30, 40, 50, 60, 70 mol%) and Ge10As20Te70-ySey (y = 20, 30, 40, 50 mol%) glasses, were studied systematically to compare the pros and cons of Te-based and Se-based chalcogenide glasses in acousto-optic performance, as well as the thermomechanical properties. In the Ge10As90-xTex system, the acousto-optic figure of merit (M-2) increased with increased Te content, and the maximum M-2 of 2279 x 10(-18 )s(3)/g, which is 13 times that of commercial single-crystal Ge, obtained in Ge10As20Te70 at 10.6 mu m. However, its thermal properties and elastic modulus decreased and the acoustic attenuation (alpha) at different ultrasonic frequencies increased accordingly. In the Ge10As20Te70-ySey system, the thermomechanical performance of the glasses improved with the introduction of Se element, the overall alpha was lower than that of Te-based chalcogenide glasses, and the minimum alpha was 5.29 dB/cm at 30 MHz ultrasonic frequency, although its M-2 was inferior to that of Te-based chalcogenide glasses. Additionally, the difference in the alpha of these glasses was smaller at low ultrasonic frequencies than at high ultrasonic frequencies. This work will promote the practical application of chalcogenide glasses as promising materials with outstanding acousto-optic properties in low ultrasonic frequency acousto-optic devices.