Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

Fundamental Insights Into Surface Modification Of Silicon Material Toward Improved Activity And Durability In Photocatalytic Hydrogen Production: A Case Study Of Pre-Lithiation

High surface area siloxene for photothermal and electrochemical catalysis

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

The Nature of Photocatalytic “water Splitting” on Silicon Nanowires

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Silicon Nanostructures for Solar-Driven Catalytic Applications

Enhancement of Solar-to-hydrogen Conversion Efficiency in Water Splitting by Optimizing Morphology of Cu2O Nanostructure and Surface Modification

Accelerated hydrogen production on atomically thin silicon nanosheets photocatalyst with unique surface adsorption chemistry

All‐Earth‐Abundant Photothermal Silicon Platform for CO2 Catalysis with Nearly 100% Sunlight Harvesting Ability

Hydrogen-terminated mesoporous silicon monoliths with huge surface area as alternative Si-based visible light-active photocatalysts

Nanoporous Silicon Photocathodes with [Co] Molecular Catalyst for Enhanced Solar-Driven Hydrogen Generation

Enhancement of Electrical Properties of Nanostructured Polysilicon Layers Through Hydrogen Passivation

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution

Surface/Interface Engineering of Si-Based Photocathodes for Efficient Hydrogen Evolution

Surface Modification of Silicon Nanowires with Siloxane Molecules for High-Performance Hydrovoltaic Devices

A Thin-Film Silicon Based Photocathode With A Hydrogen Doped Tio2 Protection Layer For Solar Hydrogen Evolution

Achieving 12.0% Solar-to-Hydrogen Efficiency with a Trimetallic-Layer-Protected and Catalyzed Silicon Photoanode Coupled with an Inexpensive Silicon Solar Cell

Activating Surface Sulfur Atoms Via Subsurface Engineering Toward Boosted Photocatalytic Water Splitting

Fabrication and Performance of 3c–sic Photocathode Materials for Water Splitting

Manipulating metal-oxygen local atomic structures in single-junctional p-Si/WO3 photocathodes for efficient solar hydrogen generation

Gradient‐Structuring Manipulation in Ni 3 S 2 Layer Boosts Solar Hydrogen Production of Si Photocathode in Alkaline Media