Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Discontinuous-long-fibre (DLF) composites fabricated from pre-impregnated unidirectional (UD) fibre chips are susceptible to structural deficiency. The in-plane highly anisotropic mechanical properties of the chips combined with the random nature of fibre orientation causes local weaknesses within the material when fibres are perpendicular to the load. Recent experimental results have shown that using woven-fibre chips could improve the performance of DLF composites by increasing their average mechanical properties and reducing their variability. To better understand the underlying phenomenon giving an advantage to the woven chips, a finite element model was developed to predict the mechanical properties obtained from a standard tensile test. DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. The maximum stress and the Puck failure criteria were employed to define damage initiation for the woven and UD fibres, respectively. Tensile modulus predictions for both types of chips showed good results when compared to experimental data. Strength predictions for the UD fibres also showed good correlation with experimental results, but the model overestimated the strength of the woven-fibre DLF composite. It appeared that the failure of the UD-fibre composites was associated with matrix failure (transverse tension and in-plane shear). Woven-fibre composites, however, showed damage modes linked to both fibre failure (longitudinal tension) and matrix failure (transverse tension and in-plane shear).

Dependence Between Displacement Distortion and Heterogeneity of Vegetable Fiber Composites

Virtual Tests of Elastodynamic Response of Natural Fiber-Reinforced Orthotropic Plates

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Effects of Fiber Shape on Mechanical Properties of Fiber Assemblies

Effect of Heterogeneous Interphase on the Mechanical Properties of Unidirectional Fiber Composites Studied by FFT-based Method

Wrinkles in Fiber-Reinforced Resin Composites: Heterogeneity and Virtual Test

Modeling of interphases in multiple heterogeneities reinforced composites using Voronoi cell finite elements

Experimental investigation of trans-scale displacement responses of wrinkle defects in fiber reinforced composite laminates

Experimental investigation of trans-scale displacement responses of wrinkle defects in fiber-reinforced composite laminates

Effect of Eccentric Tension on the Response of Wrinkle Defects in Carbon Fiber-Reinforced Composite Laminates

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions

Evaluation of Local Plastic Damage in Short Fiber Dispersed Composite

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

An asymptotic homogenization model for evaluating the mechanical properties of random fiber reinforced composites with high volume fraction

Uncertainty analysis of mechanical properties of plain woven carbon fiber reinforced composite via stochastic constitutive modeling

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Effect of micro-scale fibre uncertainties on the mechanical behaviour of natural/synthetic hybrid fibre composites

Composite Plates with Randomly Distributed Weak Bonding: Heterogeneity and Virtual Testing

Effect of polydispersity on the transport and sound absorbing properties of three-dimensional random fibrous structures

A finite element homogenization-based approach to analyze anisotropic mechanical properties of chopped fiber composites using realistic microstructural models

Compressive Behavior of Unidirectional FRP with Spacial Fibre Waviness and Non-Uniform Fibre Packing