Abstract:This paper presents a finite-element (FE) investigation on the bearing capacity of stainless steel hybrid tubular K-joints with square braces and circular chord. The nonlinear finite-element (FE) models were developed and validated against the test results available in the literature, which were then used to conduct a parametric study including 162 models. The parametric study results showed that the joint strengths of the stainless steel hybrid tubular gapped K-joints increased when the β and τ values increased and when the 2γ and e values decreased. On the other hand, the joint strengths of overlapped K-joints increased when the β, τ, and Ov values increased and when the 2γ values decreased. Furthermore, the bearing capacities obtained from the parametric study were compared with the design strengths calculated from the current design guidelines. The comparison showed that the current design rules of Chinese Code (GB 50017–2017) were generally un-conservative for stainless steel hybrid tubular K-joints. The coefficient of variations (COVs) obtained from the comparison of EC3 (2005), AS/NZS (2001) and GB 50017 (2017) were very large. However, the design strengths calculated from the International Committee for the Development and Study of Tubular Structures (CIDECT) were relatively close to the FE strengths. Therefore, modified design rules are proposed in this paper. New design formulas were developed by applying correction factors (ψg and ψo) to the current design rules of CIDECT (2008) for carbon steel CHS tubular K-joints, considering the effects of key geometric parameters of β, τ, 2γ and Ov, respectively. The proposed design rules can accurately predict the bearing capacity of stainless steel hybrid tubular K-joints with square braces and circular chord, being only 1% conservative to the FE strengths.

Stress Concentration Factors of Brace In-Plane Loaded Bird-Beak SHS Gap K-joints

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Expressions for Stress Concentration Factors for T-Joints of Hollow and Concrete-Filled Square Cross-Sections for In-Plane Axial and Bending Loads

Experimental and Numerical Analyses of the Shimming Effect on Bolted Joints with Nonuniform Gaps

Experimental Evaluation of Stress Concentration Factor of Welded Steel Bridge T-Joints

Scf Distribution Of Concrete-Filled Chs T- And Y- Joints Under Axial Tension

Experimental and numerical analyses on stress concentration factors of concrete-filled welded integral K-joints in steel truss bridges

Parametric assessment of stress concentration factors for end-to-end joints with rotated SHSs

A method for stress concentration factor determination of welded steel bridge T-joints under moving load

FE Analysis of Stress Concentrations in Composite Plates with Multiple Holes for Zigzag Multi-Fastened Joints

Experimental and numerical investigations on stress concentration factors of concrete filled steel tube X-joints

Mechanical Behaviour and Design of Concrete-Filled K and KK CHS Connections

Experiment investigations of stress concentration factor of concrete-filled tubular T joints

Probabilistic Analysis of Stress Concentration Factor of an Orthotropic Steel Bridge with FBG-Based Structural Health Monitoring System *

Prediction of Stress Concentration Factor Distribution for Multi-Planar Tubular DT-joints under Axial Loads

Theoretical and Experimental Investigation of Core-Separated Buckling-Restrained Braces

Parametric study of stress concentration factors in KT connections reinforced with concrete subjected to axial loads

Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS

Behaviour of CFDST chord to CHS brace composite K-joints: Experiments

Analytical Behaviour of CFDST Chord to CHS Brace Composite K-joints

Effects of Chord Pre-Load on Strength of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates