An Improved Modular Multilevel Converter With DC Fault Blocking Capability Based on Half-Bridge Submodules and H-Bridge Circuit
Xiongfeng Fang,Canfeng Chen,Ze Wang,Jian Xiong,Kai Zhang
DOI: https://doi.org/10.1109/tpwrd.2020.2971276
IF: 4.825
2020-12-01
IEEE Transactions on Power Delivery
Abstract:Pole-to-pole dc short circuit fault blocking capability is a major concern when modular multilevel converters (MMCs) are applied in high voltage direct current (HVDC) transmission systems. Traditional MMCs based on half-bridge submodules (HBSMs) cannot block the fault current, thus needing expensive direct current circuit breakers (DCCBs). There are MMCs based on improved submodule topologies that can block dc faults, but usually with significantly increased device cost. This paper proposes an improved HBSM-based MMC (HB-MMC) which needs fewer extra semiconductor devices. The improved HB-MMC is more competitive than other schemes when it comes to investment cost and loss. An H-bridge circuit composed of two director switches and two diode valves is installed around one arm of the HB-MMC, which will not change the direction of current during the normal operation, whereas it can change the direction of the fault current when a pole-to-pole dc short circuits fault is detected. After two director switches have been turned off, a reverse-biased voltage provided by one arm can block the fault current. The topology can be further improved to provide reactive power during faults. Simulation results are presented to validate the features of the proposed improved HB-MMC.
engineering, electrical & electronic