Abstract:By introducing the concept of time‐division multiplexing, an arm multiplexing MMC (AM‐MMC) topology with high utilization of submodules is presented to reduce the weight and volume of MMC. In order to block the DC side fault current, this paper proposes a novel submodule in AM‐MMC, instead of using full‐bridge submodules. The proposed recombined half‐bridge submodules of AM‐MMC contain four half‐bridge submodules and an IGBT with reverse parallel diodes. The lightweight of modular multilevel converter (MMC) and the DC faults ride‐through ability are main challenges for MMC‐high voltage direct current (HVDC) transmission systems. By introducing the concept of time‐division multiplexing, an arm multiplexing MMC (AM‐MMC) topology with high utilization of submodules is presented to reduce the weight and volume of MMC. In order to block the DC side fault current, this paper proposes a novel submodule in AM‐MMC, instead of using full‐bridge submodules. The proposed recombined half‐bridge submodules of AM‐MMC (RHAM‐MMC) contains four half‐bridge submodules and an IGBT with reverse parallel diodes. The topology and operating principle of RHAM‐MMC are introduced in detail. The time‐division multiplexing of middle arms between upper and lower arms is achieved by introducing arm selection switches. Thus, a new type of arm switch and switching method is designed based on the switch state. The DC faults ride‐through strategy is carried out based on its DC fault characteristic analysis. In addition, the economy analysis is conducted on the switching loss and operating loss of RHAM‐MMC. Compared with the fault ride‐through capability of other sub‐modules (SMs), RHAM‐MMC performs better in terms of investment cost and device losses. The simulation results based on MATLAB/Simulink reveal that RHAM‐MMC can achieve the DC side fault ride‐through and show effectiveness of the DC fault ride‐through control strategy.

An MMC Topology Integrated With DC Circuit Breaker

A Modular Multilevel Converter Integrated with DC Circuit Breaker

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

The Evolution and Variation of Sub-Module Topologies with DC-fault Current Clearing Capability in MMC-HVDC

An enhanced MMC topology With DC fault clearance capability

An Enhanced Mmc Topology With Dc Fault Ride-Through Capability

An Improved Modular Multilevel Converter With DC Fault Blocking Capability Based on Half-Bridge Submodules and H-Bridge Circuit

A Combined Modular Multilevel Converters Topology with DC Fault Ride-Through Capability for Bulk Power Bipolar-HVDC Transmission Systems

Modular Multilevel Converter Using IGCT-based Cross-Connected Modules for Medium Voltage DC Grids

Experiment on DC-fault Ride Through of MMC Using a Half-Voltage Clamp Submodule

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

DC Fault Ride-through Mechanism and Improved Topology Scheme of C-MMC

A Hybrid Modular Multilevel Converter With Reduced Full-Bridge Submodules

A lightweight MMC topology with recombined half‐bridge submodules for DC fault ride‐through

Modular Multilevel Converter with Embedded Energy Storage for Bidirectional Fault Isolation

A Lightweight Hybrid Modular Multilevel Converter Topology for DC Fault Blocking

A Hybrid-Arm Modular Multilevel Converters Topology with DC Low Voltage Operation and Fault Ride-Through Capability for Unidirectional HVDC Bulk Power Transmission

A mechanical DCCB with re-closure capability and its performance in MMC based DC grid

Hybrid High-Voltage Direct Current Topology with Line Commutated Converter and Modular Multilevel Converter in Series Connection Suitable for Bulk Power Overhead Line Transmission

On the Bipolar MMC-HVDC Topology Suitable for Bulk Power Overhead Line Transmission: Configuration, Control, and DC Fault Analysis

A Novel Hybrid-Arm Bipolar MMC Topology with DC Fault Ride-Through Capability