Abstract:Stealth technology encompasses various techniques to minimize the detection of acoustic, visual, infrared, and electromagnetic (EM) wave signals. Specifically, to minimize the radar cross section (RCS) of the radar system, radar-absorbing structures (RAS) capable of absorbing EM waves are essential. RAS composed of composites can be damaged, and both their structural and EM performances become important issues in RAS studies. Therefore, in this study, EM wave interactions in damaged specimens were evaluated and visualized using a scanning free-space measurement (SFM) system. First, the change in the EM performance due to damage was analyzed using Al-alloy 6061 and Teflon specimens. When the damage size was less than one-half wavelength (30 mm and 20 mm) in both the X (8.2~12.4 GHz) and Ku (12.4~18 GHz) bands, the return loss of Al-alloy 6061 was close to 0 dB and the real part of the permittivity was between 2 and 2.1. On the other hand, when the damage size was more than one-half wavelength, the EM performance in terms of the return and insertion loss and the EM properties of the material (such as the permittivity) were changed in both Al-alloy 6061 and Teflon specimens. Second, a nickel fiber-based RAS with lightning strike-induced damage was also tested by the SFM system, and a behavior similar to that of non-stealth specimens was observed. The RAS was also tested by a pulse-echo ultrasonic propagation imager (PE-UPI) system to investigate the internal damage induced by the lightning strike. Much larger delaminations than the penetration occurred at different plies of the RAS. Eventually, it was found that not only the penetration damage but also the delaminations predominantly affected the EM performance, which caused the overall stealth degradation.

Transmission Characteristics of Surface Waves in Defective Absorbing Layers

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Design and Calculation of Electromagnetic Characteristics of Structure Absorbent Materials

Defect Mode-Induced Unidirectional Flexural Wave Transmission Using Prismatic Beams with Concentrated Gradient Masses

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Surface waves extraction and their effect on effective material parameters of metamaterials

Laser-generated Rayleigh Wave for Width Gauging of Subsurface Lateral Rectangular Defects

The Theoretical Analyse of the Surface Acoustic Waves Propagated on the Surface of the Bulk Materials with Subsurface Defect

Low Pass Effect of Surface Defect Metal Based on Laser Ultrasonic

Improvement of Surface Waves Attenuation Performance with A Magnetic Thin Film Loading

Co-Evaluation of Reflection Loss and Surface Wave Attenuation for Magnetic Absorbing Material

Relationships between Surface Wave Attenuation and the Re∞ection Properties of Thin Surface Wave Absorbing Layer

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Relationships Between Surface Wave Attenuation And The Reflection Properties Of Thin Surface Wave Absorbing Layer

Research Progress of Repairing Materials of Electromagnetic Discontinuities

Loss Characteristics of TeraHertz Surface Waves on Laser Micromachined Textured Metals

Design of an Optical Transparent Absorber and Defect Diagnostics Analysis Based on Near-Field Measurement

Investigation of the damage effect on electromagnetic performance evaluation of a radar absorbing structure

Scattering of surface traveling wave and its attenuation in absorbing coating