Abstract:Different PDs ranging from 40 MWth/m3 to 300 MWth/m3 are introduced in a SD‐TMSR core and an IMSFR core to evaluate the breeding performance. It is found that a small PD less than 150 MWth/m3 is preferred to achieve a positive breeding gain and a positive net 233U production in the SD‐TMSR, while a higher PD ranging from 150 MWth/m3 to 200 MWth/m3 is more attractive to acquire a higher net 233U production of more than 146 kg/year and a shorter DT of less than 35 years in the IMSFR. Summary A liquid‐fueled molten salt reactor (MSR) can be flexibly designed with a broad range of power density (PD) and neutron spectrum, both of which have a strong impact on the breeding performance of the fuel cycle. In this work, a thermal single fluid double‐zone Th‐based MSR (SD‐TMSR) and an improved molten salt fast reactor (IMSFR) with different PDs ranging from 40 to 300 MWth/m3 are introduced to evaluate the breeding performance. The results indicate that the breeding ratios for the pure Th‐U (BRTU ) and the fissile fuel (BRfis ) at equilibrium state are negatively correlated with PD. As the PD increases from 40 to 300 MWth/m3, the BRTU declines by about 9.2% and 5.6% in the SD‐TMSR and IMSFR, respectively, due to the decreases in the probability of the natural decay and extraction of 233Pa in its total vanishment and of the ratio of the 232Th capture rate to the 233U absorption rate. Meanwhile, the BRfis keeps about 6% lower than the BRTU in both the cores because of the larger absorption cross sections of 235U and 239Pu than the capture cross sections of their parent nuclides. Owing to the low capture‐to‐fission ratios of minor actinides (MAs) and the reduced absorption cross sections of fission products, the BRTU and BRfis in the IMSFR keep about 6% higher than those in the SD‐TMSR when PD varies from 40 to 300 MWth/m3. In addition, the net 233U production can achieve the highest value of 60.5 kg/year at 90 MWth/m3 in the SD‐TMSR, and it is 154.9 kg/year at 200 MWth/m3 in the IMSFR. Although the net 233U production in the IMSFR is higher than that in the SD‐TMSR, the doubling time (DT) keeps larger in the IMSFR with the increase of PD from 40 to 100 MWth/m3 due to its higher initial loading of fissile material. In addition, the highest net 233U production of 154.9 kg/year in the IMSFR with a PD of 200 MWth/m3 can be used as the igniting fissile fuel for the SD‐TMSR, in which the corresponding DT is as short as 8.3 years. In conclusion, to achieve a thorium breeding in MSRs with different neutron spectra, a small PD less than 150 MWth/m3 is preferred to achieve a positive breeding gain and a positive net 233U production in the SD‐TMSR, while a higher PD ranging from 150 to 200 MWth/m3 is more attractive to acquire a higher net 233U production of more than 146 kg/year and a shorter DT of less than 35 years in the IMSFR.

Analyses of production capacity of <SUP>89</SUP>Sr and <SUP>90</SUP>Sr in the 2 MW molten salt reactor

Study on the production characteristics of 131I and 90Sr isotopes in a molten salt reactor

Modeling of fission and activation products in molten salt reactors and their potential impact on the radionuclide monitoring stations of the International Monitoring System

Study on Kinetic Characteristics of Krypton and Xenon radioactive source term in molten salt reactor

Innovative Compact Molten Salt Reactor (ICMSR) Analysis for Mo-99 Production

Design studies for A 50 MWth molten salt fast reactor

Radiotoxicity of Minor Actinides in Thermal, Epithermal and Fast TMSRs with Very High Burnup

Whole core analysis of the single-fluid double-zone heavy water-moderated molten salt reactor (SD-HWMSR)

Analysis of Producing 238pu As a Byproduct in an MSFR

Sustainable supply of 99Mo source in a 2 MW molten salt reactor using low-enriched uranium

Natural Convection With Non-Uniform Heat Generation In Molten Salt Reactor

Preliminary Neutronic and Thermal-Hydraulic Analysis of a 2 MW Thorium-based Molten Salt Reactor with Solid Fuel

Preconceptual nuclear design of a 50 kWth heat pipe cooled micro molten salt reactor (micro-MSR)

Molybdenum-99 from Molten Salt Reactor as a Source of Technetium-99m for Nuclear Medicine: Past, Current, and Future of Molybdenum-99

Impacts of power density on the breeding performance of molten salt reactors

Steady State Investigation on Neutronics of a Molten Salt Reactor Considering the Flow Effect of Fuel Salt

Numerical Research On Steady Coupling Of Neutronics And Thermal-Hydraulics For A Molten Salt Reactor

Development of A Safety Analysis Code for Molten Salt Reactors

Steady Thermal Hydraulics Analysis for A Graphite-Moderated Channel Type Molten Salt Reactor

Ab-Initio molecular dynamics simulations of binary NaCl-ThCl4 and ternary NaCl-ThCl4-UCl3 molten salts

The conversion of organic sulfur and strontium into inorganic compounds during the molten salt oxidation of mixed resin