Abstract:Molten salt reactors (MSRs), as one of the six main technologies of Gen IV, can meet the broad area of sustainability, economics, safety and reliability, proliferation resistance and physical protection goals. One of the main and first challenges in designing molten salt fast reactors (MSFRs) is the selection of an appropriate molten salt fuel system based on the envisaged applications and objectives. In this study's series, a full-scope evaluation has been conducted about employing either chloride or fluoride salt fuels as the main competitors' candidates for fuel salt in MSFR designs. Two distinguished projects, EVOL (CNRS, Grenoble-France), based on fluoride salt, and iMAGINE (The University of Liverpool, UK), based on chloride salts, were considered in order to achieve this goal as case studies. The first part of this series (part 1—this article) deals with the investigation of the thermophysical properties of the salt fuel system, criticality search and neutron-flux energy spectrum. An identical typical design of the MSFR core has been considered for a neutronic simulation by using MCNPX V2.7 based on the chemical composition of the fuel salt mentioned in both projects. The thermophysical evaluation has been conducted through literature research and theoretical methods based on the experimental values for the salt component properties. The results of the study are presented for thermophysical properties, including the melting point, vapour pressure/boiling point, specific heat capacity, thermal conductivity and density, in addition to neutronic simulation for the core critical dimension and neutron-flux spectrum of both the chloride- and fluoride-based salt fuel systems. In the discussion of the results, it is concluded that both the chloride and fluoride salt fuel systems have benefits that are seen on different comparative parameters. The delivered data will provide future decision makers with evidence for the salt choice for balancing their design objectives with the opportunities and expectations. Thus, a final selection of the most appropriate salt fuel system to be used in MSFRs will be postponed for more investigation in the final part of this article series, combining the data with different potential user profiles.

Preliminary Neutronic and Thermal-Hydraulic Analysis of a 2 MW Thorium-based Molten Salt Reactor with Solid Fuel

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Computational Fluid Dynamics Analysis of a Fluoride Salt–Cooled Pebble-Bed Test Reactor

Coupled neutronics/thermal-hydraulics and safety characteristics of liquid-fueled Molten Salt Reactors

A neutronic evaluation of a thorium-based molten salt breeder reactor

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

Preliminary Analysis and Design of the Energy Conversion System for the Molten Salt Fast Reactor

Preconceptual nuclear design of a 50 kWth heat pipe cooled micro molten salt reactor (micro-MSR)

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

ICONE19-43445 Investigating Thermal-Hydraulic Characteristic of Molten Fluoride Salt in A Circular Pipe Using A CFD Methodology

Preliminary Study on the Candidate Fuel Salt of Molten Chloride Salt Fast Reactor

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Conceptual Design of a Novel Megawatt Molten Salt Reactor Cooled by He-Xe Gas

Three dimensional steady‐state neutronics/thermal‐hydraulics coupled simulation for a molten salt reactor moderated by zirconium hydride rods

On the Employment of a Chloride or Fluoride Salt Fuel System in Advanced Molten Salt Reactors, Part 1: Thermophysical Properties and Core Criticality

Neutronic and fuel cycle performance analysis of fluoride and chloride fuels in Molten Salt Fast Reactor (MSFR)

Numerical research on the influence of ocean conditions on the transient response of passive decay heat removal system of the floating Fluoride-Salt-Cooled High-Temperature Reactors

COUPLE, A Time-Dependent Coupled Neutronics and Thermal-Hydraulics Code, and its Application to MSFR

Accident scenario analysis and control scheme design for a micro Molten Salt Reactor

Analysis of the thermal feedback effect and nuclides flow effect on the fuel‐cycle characteristics of Molten Salt Reactors

The neutronic characteristics of thermal molten salt reactor