Abstract:Different PDs ranging from 40 MWth/m3 to 300 MWth/m3 are introduced in a SD‐TMSR core and an IMSFR core to evaluate the breeding performance. It is found that a small PD less than 150 MWth/m3 is preferred to achieve a positive breeding gain and a positive net 233U production in the SD‐TMSR, while a higher PD ranging from 150 MWth/m3 to 200 MWth/m3 is more attractive to acquire a higher net 233U production of more than 146 kg/year and a shorter DT of less than 35 years in the IMSFR. Summary A liquid‐fueled molten salt reactor (MSR) can be flexibly designed with a broad range of power density (PD) and neutron spectrum, both of which have a strong impact on the breeding performance of the fuel cycle. In this work, a thermal single fluid double‐zone Th‐based MSR (SD‐TMSR) and an improved molten salt fast reactor (IMSFR) with different PDs ranging from 40 to 300 MWth/m3 are introduced to evaluate the breeding performance. The results indicate that the breeding ratios for the pure Th‐U (BRTU ) and the fissile fuel (BRfis ) at equilibrium state are negatively correlated with PD. As the PD increases from 40 to 300 MWth/m3, the BRTU declines by about 9.2% and 5.6% in the SD‐TMSR and IMSFR, respectively, due to the decreases in the probability of the natural decay and extraction of 233Pa in its total vanishment and of the ratio of the 232Th capture rate to the 233U absorption rate. Meanwhile, the BRfis keeps about 6% lower than the BRTU in both the cores because of the larger absorption cross sections of 235U and 239Pu than the capture cross sections of their parent nuclides. Owing to the low capture‐to‐fission ratios of minor actinides (MAs) and the reduced absorption cross sections of fission products, the BRTU and BRfis in the IMSFR keep about 6% higher than those in the SD‐TMSR when PD varies from 40 to 300 MWth/m3. In addition, the net 233U production can achieve the highest value of 60.5 kg/year at 90 MWth/m3 in the SD‐TMSR, and it is 154.9 kg/year at 200 MWth/m3 in the IMSFR. Although the net 233U production in the IMSFR is higher than that in the SD‐TMSR, the doubling time (DT) keeps larger in the IMSFR with the increase of PD from 40 to 100 MWth/m3 due to its higher initial loading of fissile material. In addition, the highest net 233U production of 154.9 kg/year in the IMSFR with a PD of 200 MWth/m3 can be used as the igniting fissile fuel for the SD‐TMSR, in which the corresponding DT is as short as 8.3 years. In conclusion, to achieve a thorium breeding in MSRs with different neutron spectra, a small PD less than 150 MWth/m3 is preferred to achieve a positive breeding gain and a positive net 233U production in the SD‐TMSR, while a higher PD ranging from 150 to 200 MWth/m3 is more attractive to acquire a higher net 233U production of more than 146 kg/year and a shorter DT of less than 35 years in the IMSFR.

Whole core analysis of the single-fluid double-zone heavy water-moderated molten salt reactor (SD-HWMSR)

A novel concept for a molten salt reactor moderated by heavy water

Flattening of Fast Neutron Flux Distribution in Molten Salt Reactor for Longer Graphite Moderator Lifetime

A neutronic evaluation of a thorium-based molten salt breeder reactor

Design studies for A 50 MWth molten salt fast reactor

Impacts of power density on the breeding performance of molten salt reactors

Conceptual Design of a Novel Megawatt Molten Salt Reactor Cooled by He-Xe Gas

Self-sustaining Core Design for 200 MWe Molten-Salt Reactor with Thorium-Uranium Fuel :FUJI-U3-(0)

Core neutronic design of small modular molten salt reactor for submarine propulsion

A Comparative Study of Th-U233 and Th-Pu Molten-Salt Reactor (MSR) with 2-region core

Three dimensional steady‐state neutronics/thermal‐hydraulics coupled simulation for a molten salt reactor moderated by zirconium hydride rods

The neutronic characteristics of thermal molten salt reactor

An improved core design of a 50 kWth heat pipe cooled micro Molten Salt Reactor (micro-MSR)

Ex‐core transition to thorium cycle in a small modular heavy‐water moderated molten salt reactor with unchanged concentration of heavy metal nuclides in the fuel salt

Thorium utilization in a small modular molten salt reactor with progressive fuel cycle modes

Neutronic and fuel cycle performance analysis of fluoride and chloride fuels in Molten Salt Fast Reactor (MSFR)

Neutronics and thermal-hydraulics coupled analysis on dimensional change and lifespan of graphite components in small modular molten salt reactor

Modeling of fission and activation products in molten salt reactors and their potential impact on the radionuclide monitoring stations of the International Monitoring System

Preliminary Study on the Candidate Fuel Salt of Molten Chloride Salt Fast Reactor

Molten Salt Reactor Sourdough Refueling and Waste Management Strategy

Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor