Abstract:Compared with the traditional Single-Ceramic-Layer Thermal Barrier Coating system (SCL-TBCs), the application of the Double-Ceramic-Layers Thermal Barrier Coating system (DCL-TBCs) can strengthen the thermal insulation performance and ameliorate the interfacial oxidation behavior. The residual stresses due to the mismatch of thermal expansion, are so important that they can lead to the spallation and delamination failure of the entire system. In present work, considering the evolution of failure positions in the DCL-TBCs, the effects of interfacial interaction and roughness parameters on the residual stresses were investigated under two different thickness distributions of the ceramic layer. Therein, the numerical models with the general periodic boundary have been developed. Results show that the morphology of the yttria partially stabilized zirconia (YSZ)/thermally grown oxide (TGO) interface can affect the stress distribution along the lanthanum zirconate (LZ)/YSZ interface in the TBCs with low thickness of YSZ, but this influence can be negligible if the YSZ is thick enough. The qualitative distribution of the residual stress along the LZ/YSZ interface is similar for various interfacial roughness parameters, and the maximum tensile stress is always presented at the peak of the LZ/YSZ interface. But for the YSZ/TGO interface, the increase in the roughness parameters can lead to the change of the maximum tensile stress position and even the transition of the stress state in the local region. Also, as the reference for judging the maximum tensile stress location, the critical wavelength was obtained based on the parametric calculation procedure, and the relationship between the critical wavelength and the YSZ/TGO interface amplitude has also been revealed. Moreover, the analysis results can also help to understand the failure mechanisms of the DCLTBCs and provide a reference for further process optimization.

A Parametric Study of the Double-Ceramic-layer Thermal Barrier Coatings Part I: Optimization Design of the Ceramic Layer Thickness Ratio Based on the Finite Element Analysis of Thermal Insulation (take LZ7C3/8YSZ/NiCoAlY DCL-TBC for an Example)

Sensitivity Analysis and Multi-Objective Optimization of Double-Ceramic-layers Thermal Barrier System

Optimization Design and Performance Verification of the CeYSZ/Al2O3 Double Ceramic Layer Thermal Barrier Coatings Structure Parameters

Interfacial delamination of double-ceramic-layer thermal barrier coating system

Effect of Geometric Parameter on Thermal Stress Generation in Fabrication Process of Double-Ceramic-layers Thermal Barrier Coating System

Design and optimization of coating structure for the thermal barrier coatings fabricated by atmospheric plasma spraying via finite element method

Optimization of the Thickness and Interface Structure of Al2O3-YAG/ZrO1.5-YO1.5-TaO1.5/8YSZ/NiCoCrAlY Multilayer Thermal Barrier Coatings: A Finite Element Simulation

Study on Construction Mechanism of Ceramic–Metal Thermal Barrier Coating System by Plasma Spraying

Interface conjunction factors of thermal barrier coatings and the relationship between factors and composition

Interfacial Fracture Behavior of Double-Ceramic-layer Thermal Barrier Coating System with Segmented Structure

Matching Design of Thickness Ratio to Extend the Lifespan of Double-Layered Thermal-Barrier Coatings

Surrogate Model for Energy Release Rate and Structure Optimization of Double-Ceramic-layers Thermal Barrier Coatings System

Thermal Gradient Cyclic Lifetime of La2Zr2O7/YSZ Double Ceramic Layer Thermal Barrier Coatings with Equivalent Thermal Insulation Performance

A novel structure design towards extremely low thermal conductivity for thermal barrier coatings - Experimental and mathematical study

Bending-driven Failure Mechanism and Modelling of Double-Ceramic-layer Thermal Barrier Coating System

Microstructure Design to Improve the Efficiency of Thermal Barrier Coatings

Interfacial interaction and roughness parameters effects on the residual stresses in DCL-TBC system with different thickness distributions

Novel thermal barrier coatings based on Mg2SiO4/8YSZ double-ceramic-layer systems deposited by APS

Effect of different heat transfer coefficients on the performance of thermal barrier coatings under thermo-mechanical couple process

Theoretical and Numerical Study on Thermal Insulation Performance of Thermal Barrier Coatings

Mechanisms Governing the Interfacial Delamination of Thermal Barrier Coating System with Double Ceramic Layers