Abstract:The structure of a TBC is locally tailored oriented by regional performance requirements to balance the tradeoff between high thermal insulation and long lifespan. The design‐matched TBCs exhibited double the lifespan of the conventional sample with comparable thermal insulation. Mechanism responsible for the long life span was revealed based on healing of the intrinsic two‐dimensional pores and formation of new large pores. Thermal barrier coatings (TBCs) require both a porous structure to effectively prevent heat flux and a considerably dense structure to resist cracking for long‐term protection. These opposite requirements are difficult to achieve in conventional TBCs, which often exhibit uniform structures across their thickness. In fact, the main requirements of a coating vary with thickness owing to differential service conditions. In this study, the structure of a TBC is locally tailored to meet regional performance requirements. First, the load‐bearing conditions across the thickness are investigated in a simulation study. Resulting from multiple causes, the bottom region must bear a larger stress than the top region, which is directly exposed to heat flux. Therefore, the structure should be crack‐resistant in its bottom region and thermally insulating in its top region. Second, region‐function‐matching TBCs were prepared, and their performances were evaluated through isothermal cycling and thermal exposure tests. Results show that the TBCs with matching design exhibited double the lifespan of the conventional samples, whereas the thermal insulation was comparable. Finally, the structural evolutions were examined in different regions to analyze the failure behaviors of the TBCs. Healing of the intrinsic two‐dimensional pores and formation of the new large pores mainly account for the changes in thermal and mechanical properties of the TBCs. Overall, this region‐function‐matching design is expected to balance the tradeoff between high thermal insulation and long lifespan.

Optimization Design and Performance Verification of the CeYSZ/Al2O3 Double Ceramic Layer Thermal Barrier Coatings Structure Parameters

Optimization of the Thickness and Interface Structure of Al2O3-YAG/ZrO1.5-YO1.5-TaO1.5/8YSZ/NiCoCrAlY Multilayer Thermal Barrier Coatings: A Finite Element Simulation

Design and optimization of coating structure for the thermal barrier coatings fabricated by atmospheric plasma spraying via finite element method

Novel thermal barrier coatings based on Mg2SiO4/8YSZ double-ceramic-layer systems deposited by APS

Superposed structure of double-ceramic layer based on YSZ/LaMgAl11O19 thermal barrier coating

Structural Optimization for the Thermal Conductivity and Thermal Cycling Behavior in Thermal Barrier Coatings and Analysis of Thermomechanical Properties by Computational Investigation

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Progress in ceramic materials and structure design toward advanced thermal barrier coatings

Investigation of Thermal Shock Behavior of Multilayer Thermal Barrier Coatings with Superior Erosion Resistance Prepared by Atmospheric Plasma Spraying

Enhancing the performances of EB-PVD TBCs via overlayer Al-modification

Effects of Top Ceramic Layers with an Ultrathin Dense Layer on the Thermal–Physical Properties of Thermal Barrier Coatings

Thermal shock life and failure behaviors of La2Zr2O7/YSZ, La2Ce2O7/YSZ and Gd2Zr2O7/YSZ DCL TBCs by EB-PVD

Performance of TBCs system due to the different thicknesses of top ceramic layer

Thermal cycling and steam corrosion behavior of Yb3Al5O12‐based multilayered environmental barrier coatings for SiCf/SiC

Microstructure design of the laser glazed layer on thermal barrier coatings and its effect on the CMAS corrosion

Thermal cycling performance of GYbZ/YSZ thermal barrier coatings with different microstructures based on finite element simulation

LaYbZrO thermal barrier coatings by EB-PVD: Microstructure, thermal shock life and failure behaviors

The toughening design of multi-layer antioxidation coating on C/C matrix via SiC-SiCw transition layer grown in-situ

Region‐function‐matching design for YSZ‐based thermal barrier coatings enables long thermal cyclic lifespan

Thickness-related failure behaviors of the thermal barrier coatings under thermal gradient cycling

Thermal cycling of EB-PVD TBCs based on YSZ ceramic coat and diffusion aluminide bond coat