Abstract:To understand the effect of CaCl2 addition on the dephosphorization ability of steelmaking slags, laboratory experiments were carried out to study the phosphorus distribution between CaO–SiO2–FeOx–P2O5–CaCl2 slags and carbon-saturated iron at steelmaking temperature. The phosphorus distribution ratio between slag and pure iron foil (\( L_{\text{P}}^{{{\text{Fe-}}\gamma }} \)) was measured by equilibrium experiments and converted into the phosphorus distribution ratio between slag and carbon-saturated iron (\( L_{\text{P}}^{{\text{Fe}}{-}{\text{C}}} \)) using thermodynamic calculations. The influential mechanism of CaCl2 was also discussed based on the phases in the slags. It was found that the addition of CaCl2 is beneficial for the improvement of \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \). In the slag with basicity (R = [w(CaO)/w(SiO2)]) of 1.0, the P content in the liquid slag was increased by the addition of CaCl2. When the basicity is sufficiently high (e.g., R≥1.5), the addition of CaCl2 enhances the generation of P-rich solid phases, including both 2CaO·SiO2–3CaO·P2O5 (C2S–C3P) and Ca5Cl(PO4)3. Compared with CaCl2-free slags, CaCl2 addition in BOF slags doesn't evidently change the effects of slag basicity and FeOx content. With the increase of slag basicity (1.0 to 2.0), the amount of C2S–C3P solid solution in the slag climbs obviously, resulting in a higher \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) both in CaCl2-added slags and CaCl2-free slags, while \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) increases first and then decreases when the FeOx content varies from 15 to 35 pct in this study.

Effect Of Various Components On The Distribution Of Phosphorus In Cao-Feo-Mgo-Sio2-Mno-Tio2-V2o5-P2o5 Slag Based On Imct

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Distribution Behavior Of Vanadium, Chromium And Phosphorous Between Basic Slag And Semi-Steel

A thermodynamic model for predicting activity of CaO–SiO2–Al2O3–MgO–TiO2–V2O3–FeO slags during electric furnace smelting process

Effect of CaCl2 Addition on Phosphorus Distribution Between CaO–SiO2–FeOx–P2O5 Slag and Carbon-Saturated Iron at Steelmaking Temperature

The Study on the Interface Reaction Characteristics of Different Binary Slag, CaO – MgO, Al2O3 – CaO, Al2O3 – MgO, SiO2 – CaO, SiO2 - MgO

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Influence Of Tio2 And Basicity On Viscosity Of Ti Bearing Slag

A Thermodynamic Model of Sulfur Distribution Ratio Between CaO–SiO2–MgO–FeO–MnO–Al2O3 Slags and Molten Steel During LF Refining Process Based on the Ion and Molecule Coexistence Theory

Influence of FeO activity on sulfur distribution ratio in steel slag

Effect of CaO/SiO2 and P2O5 on the Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags

STUDY ON DEPHOSPHORIZATION ABILITY OF MULTI-SLAG SYSTEM

Effect of Cr2O3 content on viscosity and phase structure of chromium-containing high-titanium blast furnace slag

Structural Characteristics of CaO-SiO2-Al2O3-FeO Slag with Various FeO Contents Based on Molecular Dynamics Simulations

Structural and Viscous Insight into Impact of MoO3 on Molten Slags

A thermodynamic model of the titanium distribution behaviour between slag and molten steel during LF refining process: description and application

Prediction of component activities in the ternary molten slags containing titanium oxide by pseudo-multicomponent approach of MIVM

Effect of Al2o3 Addition on the Precipitated Phase Transformation in Ti-Bearing Blast Furnace Slags

Effect of BaO and MnO on high-temperature properties and structure of blast furnace slag