Abstract:Research purposes:The determining method and risk assessment of the strong wind region along high-speed railway relate to the scientificalness of distribution of monitoring spots for disaster prevention,to the representativeness and reliability of acquisition of data on instantaneous wind speed and wind direction and to providing reasonable speed-limit instructional information for a driving command and control system or to providing decision-making basis for starting up the emergency plan for the purpose of achieving the aim of ensuring safe and high-efficient railway traffic. Research conclusions:For the maximum instantaneous wind speed in the area where is 4 m high from the rail surface along the high-speed railway,the level distribution feature of the design value V_4_2max of the maximum instantaneous wind speed biennially is basically the same as that of the design value V_4_30max of the maximum average wind speed every thirty years.In this paper,it is proposed the design value V_4_2max of the maximum instantaneous wind speed biennially in any place where is 4 m high from the rail surface along the high-speed railway is the master control factor for determining the strong wind region,and the included angle(β) between the line orientation and the main wind direction and the deflection angle(smaller than 10°) of the strong wind regions of the high-filling embarkment,the viaduct and the curved conduit of bridge must be gradually optimized.The strong wind(gust) coefficient is calculated with the linear regression equation of least square method,getting good effect.Therefore,it proves the optimal scientificalness of the disaster prevention and distribution principle of the safety monitoring point in the strong wind region along the high-speed railway,and representativeness and reliability of the acquisition of data on the instantaneous wind speed and wind direction.It can provide the reference to optimizing the monitoring point distribution plan of the strong wind region along the high-speed railway in China and instituting the technical standard and criterion for the wind fence distribution.

Method for confirming wind direction field in wind power station group

Method for confirming wind direction field in wind power plant

Method for establishing wind power plant group wind speed three-dimensional network

A method for establish a three-dimensional wind speed distribution correlation diagram in a wind farm

Wind power plant group power generating capacity evaluation method based on big data mining technology

Wind power plant power generation capacity assessment method based on multiple method data fusion

An improved three points comparing algorithm applied in wind power generation

Wind power probability forecasting method and forecasting device

Wind power plant wind speed acquisition method based on various sensors

Evaluation simulation system and evaluation method for theoretical output of integrated wind power plant

SIMULATION OF FLUCTUATING WIND IN WIND FARM AND DYNAMIC RESPONSE OF WIND TURBINE TOWER

A novel control strategy of direct-drive pmsg wind generation mppt based on experimental imitation platform

An On-Site Measurement Coupled CFD Based Approach for Wind Resource Assessment over Complex Terrains.

Application of Lidar in Comparison of Wind Speed and Wind Direction Meters in Wind Power Field

A Novel Power-Flow Balance Lvrt Control Strategy For Low-Speed Direct-Drive Pmsg Wind Generation System

The influence of wind turbine blade rotation on Wind direction meter

Wind Power Assessment Based on a WRF Wind Simulation with Developed Power Curve Modeling Methods

Determining Method and Risk Assessment of Strong Wind Region along High-speed Railway in China

A statistical method to merge wind cases for wind power assessment of wind farm

Wind resource monitoring system and method based on ZigBee

Wind resource assessment at mountainous wind farm: Fusion of RANS and vertical multi-point on-site measured wind field data