Abstract:The correct electric power fluctuation process of a wind farm is essential for the operation and studying of the power grid integrated with wind power. A complete wind energy conversion model, that should take both the spatial effects and the overall effect of all the pitch angle controllers into account, is required to convert the wind fluctuation into the electric power fluctuation. Although some equivalent models have been proposed in previous studies, there is no simple solution for equivalently modeling the non-synchronous actions of the pitch angle controllers in individual wind turbine generators. This study found the relationship between the overall effect of all the pitch angle controllers and the spatial effects of the wind farm and presented a theoretical derivation of the frequency-domain equivalent modeling method. The proposed modeling method is the simplest way to obtain the equivalent model of the complete wind energy conversion process of a wind farm with consideration of all the spatial effects and the overall effects of all the pitch angle controllers. The only input signal of the proposed equivalent model is the speed of the wind before entering the wind farm, which is called the "original incoming wind speed" and the only output signal is the total power of the wind farm. In this proposed equivalent modeling method, a discrete transfer function for representing both the wind energy conversion process, and all the spatial effects of a wind farm, can be obtained, first through a wind process below the rated wind speed. Second, a compensation factor for calculating a "compensation wind speed" of the original incoming wind can be obtained through a wind process that partly exceeds the rated wind speed. Using this compensation wind speed, a compensation power with negative values can be obtained to represent the total reduced power caused by the pitch angle controllers in individual wind turbine generators. A frequency-domain equivalent model has been identified and validated by field measurements of an actual wind farm. The normalized root-mean-squared error of the model is less than 8% over the entire wind process, and the maximum error of the power ramp rate in 10 min is less than 5 MW. Finally, an example is provided to demonstrate the online use of the proposed model to convert the forecasted wind speed into output power of a wind farm in ultrashort-term wind power forecast.

Method for confirming wind direction field in wind power plant

Method for confirming wind direction field in wind power station group

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

Wind power plant power generation capacity assessment method based on multiple method data fusion

Method for establishing wind power plant group wind speed three-dimensional network

Wind power plant group power generating capacity evaluation method based on big data mining technology

A method for establish a three-dimensional wind speed distribution correlation diagram in a wind farm

Wind environment simulation and wind power utilizability of Anzhong Building

INVESTIGATION On AN AC EXCITED VARIABLE-SPEED CONSTANT-FREQUENCY WIND-POWER GENERATION SYSTEM

An improved three points comparing algorithm applied in wind power generation

Wind power plant wind speed acquisition method based on various sensors

Evaluation simulation system and evaluation method for theoretical output of integrated wind power plant

An On-Site Measurement Coupled CFD Based Approach for Wind Resource Assessment over Complex Terrains.

The influence of wind turbine blade rotation on Wind direction meter

Application of Lidar in Comparison of Wind Speed and Wind Direction Meters in Wind Power Field

Wind power probability forecasting method and forecasting device

SIMULATION OF FLUCTUATING WIND IN WIND FARM AND DYNAMIC RESPONSE OF WIND TURBINE TOWER

High resolution wind resource assessment method based on mesoscale atmospheric model and CFD technology

Electric power system wind power plant fair-share scheduling method based on minimum wind curtailment control

Wind resource assessment at mountainous wind farm: Fusion of RANS and vertical multi-point on-site measured wind field data

Wind Power Assessment Based on a WRF Wind Simulation with Developed Power Curve Modeling Methods