Abstract:The utilization of wind energy has attracted extensive attentions in the last few decades around the world, providing a sustainable and clean source to generate electricity. It is a common phenomenon of wake interference among wind turbines and hence the optimization of wind farm layout is of great importance to improve the wind turbine yields. More specifically, the accuracy of the three-dimensional wake model is critical to the optiamal design of a real wind farm layout considering the combinatorial effect of wind turbine interaction and topography. In this paper, a novel learning-based three-dimensional wake model is proposed and subsequently validated by comparison to the high-fidelity wake simulation results. Moreover, due to the fact that the inevitable deviation of actual wind scenario from the anticipated one can greatly jeopardize the wind farm optimization outcome, the inaccuracy of wind condition prediction using the existing meteorologic data with limited-time measurement is incorporated into the optimization study. Different scenarios including short-, medium-, and long-term wind data are studied specifically with the wind speed/direction prediction errors of [Formula: see text] 0.25 m/s, [Formula: see text] 5.62 [Formula: see text], [Formula: see text] 0.08 m/s, [Formula: see text] 1.75 [Formula: see text] and [Formula: see text] 0.025 m/s, [Formula: see text] 0.56 [Formula: see text], respectively. An advanced objective function which simultaneously maximizes the power output and minimizes the power variance is employed for the optimization study. Through comparison, it is found that the optimized wind farm layout yields over 210 kW more total power output on average than the existed wind farm layout, which verifies the effectiveness of the wind farm layout optimization tool. The results show that as the measurement time for predicting the wind condition gets longer, the total wind farm power output average increases while the error of power output prediction decreases. For the wind farm with 20 wind turbines installed, the individual power output is above 500 kW with an error of 90 kW under the short-term wind [Formula: see text] 0.25 m/s, [Formula: see text] 5.62 [Formula: see text], while it is above 530 kW with an error of 10 kW under the long-term wind [Formula: see text] 0.025 m/s, [Formula: see text] 0.56 [Formula: see text].

An improved three points comparing algorithm applied in wind power generation

The Application of Improved Hill-Climb Search Algorithm in Wind Power Generation

Comparative studies on equivalent modeling methods for wind farms based on non-electric parameters

Least-square B-spline Approximation Based Wind Turbine Power Curve Modeling

A Fuzzy Logical MPPT Control Strategy for PMSG Wind Generation Systems

Maximum power point tracking algorithms for wind power generation system: Review, comparison and analysis

Output Power Modeling of Wind Turbine Based on State Curve Analysis

Wind Power Assessment Based on a WRF Wind Simulation with Developed Power Curve Modeling Methods

A statistical method to merge wind cases for wind power assessment of wind farm

Study on a performance matching method of wind rotor and generator based on energy transfer

Study of the Method for Tracking the Power of a Hydraulic Type Wind Power Generator Unit

A New Three-mode Maximum Power Point Tracking Algorithm for Doubly Fed Induction Generator Based Wind Energy Conversion System

An Algorithm for Practical Power Curve Estimation of Wind Turbines

Wind turbine simulation principle and design and realization of experimental platform

A new three-dimensional wake model for the real wind farm layout optimization

Study on the improvement of wind resources assessment method

Technical Comparison Between Several Common Wind Power Generation Systems

Method for establishing wind power plant group wind speed three-dimensional network

Research on a Rapid Active Power Control Method for Wind Farms Based on Dynamic Operating Points

Statistical Method of Low Efficiency Wind Turbine Generating Wind Power Curve Based on Operating Data

Maximum power point tracking control of wind turbines based on equivalent sinusoidal wind