Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

Numerical Investigation of the Coupling Effect in CORC Cable with Striated Strands

Numerical study on the electromagnetic characteristics of multi-layer CORC cables

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

An Equivalent Cross-Section Model for CORC Cable to Achieve Accurate AC Loss Estimations

Numerical Study on the Influence of Copper Former on AC Loss Characteristics of Conductor on Round Core Cable

Study on the Influence of Thermal and Magnetic Field on CORC Cable Properties by a 2D Model

Numerical Study on Mechanical Properties of Conductors on Round Core Cables

Numerical simulations of electromagnetic behavior in CORC cable based on a modified H - <i>?</i> formulation

Numerical study on the transport current distribution in the multi-layer CORC coil

Magnetization Loss of Corc Cables under Axial Tensile Loading

The Impacts of Winding Direction on the Electromagnetic Characteristics of CORC Cables

Numerical Study on AC Loss Characteristics of Conductor on Round Core Cables under Transport Current and Magnetic Field

Numerical Study on the Influence of Superconductor Layer Thickness on AC Losses in Conductor on Round Core Cable

Numerical Analysis of the Mechanical and Electrical Properties of CORC Cables under Torsional Loading

Analysis of AC Transport Loss in Conductor on Round Core Cables

An Electromagnetic-Thermal Modeling Method for the Joint Resistance of the CORC Cable

Analysis on the Effect of Superconductor Layer Thickness on the AC Loss of Conductor on Round Core (CORC) Cables

Experimental and Numerical Study on the Transport AC Loss of Bent CORC Cables

Magnetization Loss Characteristics in Superconducting Conductor on Round Core Cables with a Copper Former

3D FEM Modelling of CORC Commercial Cables with Bean's like magnetization currents and its AC-Losses Behaviour

Prediction of strain, inter-layer interaction and critical current in CORC<sup>®</sup> wires under axial strain by T-A modeling