Abstract:A substantial advancement has been made in the prospective design strategy of composite alloys Sn–5Sb–0.3Cu (SSC503) containing multi-walled carbon nanotubes (MWCNT). These alloys may offer superior strength-ductility synergy compared to step soldering technology. The mechanical stability of the composites was measured using the pulse-echo overlap method. We employed Poisson's ratio and Pugh's ratio criteria to derive trends in the interatomic bonding character and brittleness vs. ductility. The results reveal a strong dependence of the elastic properties on the MWCNT reinforcement content, which in turn triggered the dendritic/cellular transition of β-Sn grains and inhibited the growth of the β-Sn, Sn 3 Sb 2 , β-SnSb, and Cu 6 Sn 5 phases. The ductility of the SSC503–0.1MWCNT composite was increased by ~ 29%, while a greater ionic contribution of interatomic bonding was achieved in all composites, even though the undercooling and pasty range were improved. Inclusion of 0.05 and 0.1 wt% MWCNTs into the SSC503 alloy decreased the pasty range from 7.9 to 5.9 and 6.6 °C, respectively. Moreover, the undercooling value shifted from 4.5 °C to a lower value of 3.3 and 3.9 °C. In addition, the mechanical properties were improved; the Young modulus and attenuating coefficient increased by 27.03 and 222.93% with 0.05 wt% MWCNTs, and with 0.1 wt% MWCNTs, by 20.76 and 141.98%, respectively. The improved properties arise due to different strengthening mechanisms involving interfaces, precipitation, and grain boundary area, which are the main contributions to the mechanical stability of these composites.

Improvement of mechanical properties of Sn–58Bi alloy with multi-walled carbon nanotubes

Morphology Characterization of Multi-Walled Carbon Nanotubes in Sn-58bi/Cnts Composites

Improved Microstructure and Mechanical Properties for Sn58bi Solder Alloy by Addition of Ni-Coated Carbon Nanotubes

Study on the Mechanism of CNTs Regulating the Microstructures and Properties of Al–Cu–Mg Alloy

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Synergistic effect of MWCNT addition on the thermal and elastic properties of Sn–5Sb–0.3Cu alloy

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

Mechanical Properties and Interfacial Analysis of Aluminum Matrix Composites Reinforced by Carbon Nanotubes with Diverse Structures

Remarkable improvement of mechanical properties of layered CNTs/Al composites with Cu decorated on CNTs

Strengthening and Deformation Mechanisms in Nanolaminated Single-Walled Carbon Nanotube-Aluminum Composites

Study on the Properties of Carbon Nanotube (CNTs) Reinforced AlSi10Mg Composites Fabricated by Powder Metallurgy

Multiwalled Carbon Nanotubes–TiB2–Ni Composite: Microstructure and Mechanical Properties

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Nanoscale Dispersion of Carbon Nanotubes in a Metal Matrix to Boost Thermal and Electrical Conductivity via Facile Ball Milling Techniques

Enhancement of ultimate tensile strength and ductility of copper matrix composites using a low content of single-wall carbon nanotubes

Regulating the mechanical properties and electrical conductivity of CNTs/Cu composites by tailoring nano-sized TiC on the surface of intact CNTs

Mechanical and Conductive Properties of Cu Matrix Composites Reinforced by Oriented Carbon Nanotubes with Different Coatings

Interfacial modification strategy to break through the strength and ductility trade-off in multi-walled carbon nanotubes reinforced titanium matrix composites

Fabrication and Mechanical Properties of CNT/Al Composites Via Shift-Speed Ball Milling and Hot-Rolling

Enhanced Mechanical Properties and High Electrical Conductivity in Multiwalled Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites

Enhancement of mechanical properties and conductivity in carbon nanotubes (CNTs)/Cu matrix composite by surface and intratube decoration of CNTs