Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

Multiscale Measurements with Adjustable X-Ray Spot Size for in Situ Imaging and Diffraction.

Multispectral Large-Panel X-ray Imaging Enabled by Stacked Metal Halide Scintillators

Energy-resolving large area X-ray imaging enabled by stacked metal halide scintillators

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

High-Resolution Scanning X-ray Diffraction Microscopy

Multiscale in-situ characterization of static recrystallization using dark-field X-ray microscopy and high-resolution X-ray diffraction

Simultaneous Multiscale Measurements on Dynamic Deformation of a Magnesium Alloy with Synchrotron X-Ray Imaging and Diffraction

Full-Field Nanoscale X-ray Diffraction-Contrast Imaging using Direct Detection

A novel SAXS/XRD/XAFS combined technique for in-situ time-resolved simultaneous measurements

Realizing In-Plane Surface Diffraction by X-Ray Multiple-Beam Diffraction with Large Incidence Angle

Note: Dynamic Strain Field Mapping with Synchrotron X-ray Digital Image Correlation.

Multiscale Measurements on Temperature-Dependent Deformation of A Textured Magnesium Alloy with Synchrotron X-Ray Imaging and Diffraction

Accurate X-ray Source Dimension Measurement by the Spherically Bent Crystal Imaging System

Direct detection system for full-field nanoscale X-ray diffraction-contrast imaging

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Diffractive small angle X-ray scattering imaging for anisotropic structures

Laboratory-scale X-ray Absorption Spectrometer with a Cylindrical Johansson Crystal Analyzer

Multispectral large-area X-ray imaging enabled by stacked multilayer scintillators

Multispectral large‐area X‐ray Imaging Enabled by Stacked Metal Halide Scintillators

Synchrotron-based high-energy X-ray diffraction and microdiffraction investigations on the mechanical heterogeneity of heterostructured metals

Implementation of a dual-phase grating interferometer for multi-scale characterization of building materials by tunable dark-field imaging