Abstract:Metal foam has been widely employed to accelerate the melting behavior of latent heat thermal energy storage (LHTES) system. Nevertheless, its homogeneous structure has a limited enhancement on the conductive and convective heat transfers in the melting process. In this study, we numerically studied the heat storage performance of the graded metal foam composite phase change materials (CPCMs). The body-centered-cubic unit was conducted to represent the metal foam with a complex interconnected structure. For clarifying the effect of heat flux orientation, we built seven models with the inclinations of 0˚, 30˚, 60˚, 90˚, 120˚, 150˚, 180˚, respectively. Meanwhile, three types of metal foams with different structures, including the uniform, negative, and positive porosities, were built to enhance the melting process and analyze their effects. By comparing the melting performances of the uniform models with different inclinations, it is found that the heat flux orientations (model inclinations) have significant impacts on the melting behaviors. The models with large inclinations (θ > 90˚) have faster melting-processes compared with those small inclinations (θ ≤ 90˚). Besides, by comparing the models with different graded structures, we conclude that the negative model is the most helpful to the charging process. When the inclinations of the models are 120˚ and 150˚, the negative models have reductions of 11.06% on the complete melting times compared with those uniform models. Nevertheless, the models with small inclinations were slightly enhanced by negative porosity structure (0.52%–3.15%) but significantly weakened by positive structure (21.93%–30.00%). The study reveals the effects of heat flux orientation and graded metal foam on the melting performance of PCM. It provides a design and optimized reference for the models with tilted angles such as electronic devices and plate latent heat storage systems.

Influence of Aspect Ratios for a Tilted Cavity on the Melting Heat Transfer of Phase Change Materials Embedded in Metal Foam

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

Thermal Transport in Phase Change Materials Embedded in Metal Foam: Evaluation on Inclination Configuration

Influence of model inclination on the melting behavior of graded metal foam composite phase change material: A pore-scale study

Experimental investigation on the melting behavior of phase change materials in open-cell metal foams in an inclined rectangular enclosure

Thermocapillary convection modes and phase change heat transfer characteristics of three-dimensional metal foam composited phase change materials with different aspect ratios under microgravity

Numerical investigation on thermal performance of phase change materials embedded in functionally graded metal foam

Experimental Study on Heat Transfer During Melting in Metal and Carbon Foam Saturated with Phase-Change Materials for Temperature Control in Electronic Devices

Effect of Inclination on the Thermal Response of Composite Phase Change Materials for Thermal Energy Storage

Direct Numerical Simulation on Melting Phase Change Behavior in Open-cell Metal Foam

Melting of Phase Change Materials Inside Metal Foams with Uniform/graded Porosity: Pore-scale Simulation

Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam

Modeling Metal Foam Enhanced Phase Change Heat Transfer in Thermal Energy Storage by Using Phase Field Method

Numerical simulation of heat transfer performance in an enclosure filled with a metal foam and nano-enhanced phase change material

Unconstrained melting of phase change material in cylindrical containers inside hot water tanks: Numerical investigation and effect of aspect ratios

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

Effect of metal foam with two-dimensional porosity gradient on melting behavior in a rectangular cavity

Optimization of adaptive metal foam arrangement in a heat storage tank

Design and study of metal foam parameters on whole melting-solidification cycle in phase change heat storage system

Pore-scale investigation on effects of void cavity distribution on melting of composite phase change materials

Numerical studies on a fin-foam composite structure towards improving melting phase change